Samsung Galaxy Note 10.1 SM-P605 Firmware

Last Updated: July 6, 2026

Getting the Samsung Galaxy Note 10.1 SM-P605 running smoothly again starts with grabbing the right firmware files and following the correct steps. This page has everything you need to restore your device, including the official Samsung Galaxy Note 10.1 SM-P605 firmware, drivers, and a clear guide.

---

Samsung Galaxy Note 10.1 SM-P605 Firmware (Flash File) Drivers, Tools & Guide

Flashing the Samsung Galaxy Note 10.1 SM-P605 firmware is the most reliable way to fix software glitches and get your tablet back to its original factory settings. This guide covers everything you need, including the official Samsung Galaxy Note 10.1 SM-P605 firmware, drivers, and a clear guide.

Before you start, if your tablet has a Samsung account signed in, sign it out first. Skipping this step can trigger the Knox security lock, which makes the device harder to use after a flash. Also, keep an eye out for the file format. Samsung firmware usually comes as a .tar.md5 file. After you unzip the package, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you see a single file or a different naming scheme, you might have the wrong package.

There are two firmware files available for the Samsung Galaxy Note 10.1 SM-P605 on this page. Pick the one that matches your current Android version for the best experience. This device runs on a Snapdragon 800 (MSM8974AA) Quad-core 2.3 GHz Krait 400 processor, which is a solid chip for its time. You will need the Qualcomm Flash Image Loader (QFIL) and Qualcomm HS-USB drivers for this process. Make sure your drivers are installed before you try to connect the device. The stock ROM comes with Android 4.3 (Jelly Bean), but you can upgrade to 5.1.1 (Lollipop) with the TouchWiz UI.

Samsung uses a specific multi-file system (AP, BL, CP, CSC) for Odin, which is different from other tools that use scatter files. The Samsung Galaxy Note 10.1 SM-P605 was released in 2013, so finding the right files for it is part of the fun. I keep this page updated with the latest builds as they become available.

Download the firmware file, which comes as a compressed ZIP archive. Use WinRAR or 7-Zip to extract it. After extracting, you should see files named AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you might have the wrong firmware package for your device.

A full flash will wipe everything on the device: your apps, accounts, photos, and settings. That is the point, it gives you a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.

---

Samsung Galaxy Note 10.1 SM-P605 Hard Reset Guide

To perform a hard reset on the Samsung Galaxy Note 10.1 SM-P605 without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Samsung Galaxy Note 10.1 SM-P605 to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.

---

Bypass Google Lock on Samsung Galaxy Note 10.1 SM-P605

The fastest way to bypass FRP on Samsung Galaxy Note 10.1 SM-P605 is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

Why Flash Stock ROM on Samsung Galaxy Note 10.1 SM-P605?

Flashing the official Samsung Galaxy Note 10.1 SM-P605 firmware is essential for resolving persistent issues like bootloops, forgotten patterns, or network connectivity failures. Samsung devices use Odin for flashing regardless of the chipset inside, so this method works for the Snapdragon 800 processor in this tablet.

• Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
• Remove persistent malware or adware that survives a factory reset.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Resolve touchscreen responsiveness issues caused by a corrupted system build.
• Restore the original Samsung stock ROM to keep your warranty valid.
• Unlock your device if it has been locked or disabled.
• Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.

Learn more about stock ROMs and why flashing works.

---

Samsung Galaxy Note 10.1 SM-P605 Firmware Compatibility Check

The biggest risk when flashing a Samsung Galaxy Note 10.1 SM-P605 is using firmware meant for a different model or region. Before downloading anything, verify your exact device identity:

1. Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-P605). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
2. Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
3. Check the Binary Level: Look at the version string in your current firmware (e.g. XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware.
4. Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
5. Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.

---

Firmware Details for Samsung Galaxy Note 10.1 SM-P605

The specifications for the Samsung Galaxy Note 10.1 SM-P605 firmware highlight its Qualcomm Snapdragon 800 processor and the Android 4.3 Jelly Bean foundation.

Firmware Information	Details
Device Model	Samsung Galaxy Note 10.1 SM-P605
Firmware Version	V5
File Size	1.4 GB to 1.5 GB
Android Version	Android 4.3 (Jelly Bean), upgradable to 5.1.1 (Lollipop), TouchWiz UI
Platform	Qualcomm Snapdragon 800 (MSM8974AA) Quad-core 2.3 GHz Krait 400
Release Date	Released 2013, October
Region	Global, Africa and Asia
File Type	.tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)

---

Which Firmware Version Should I Download?

Selecting the correct firmware version for your Samsung Galaxy Note 10.1 SM-P605 depends on your current Android version and whether you are trying to fix a boot issue or just perform a factory reset.

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	the latest version, download this one. It is the latest Samsung Galaxy Note 10.1 SM-P605 firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Not sure which region/CSC to download	Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename.
Phone slow after a recent OTA update	Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has.
IMEI missing after a previous flash	Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash.
the latest version failed with a flash error	Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem.
Restoring to factory / warranty repair	the latest version, clean state, fresh start.

To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.

---

Download Samsung Galaxy Note 10.1 SM-P605 Firmware

You can download the official Samsung Galaxy Note 10.1 SM-P605 firmware files from the table below. The latest available version is the latest version. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: P605XXUBMJ9_P605VFGBMK1_AVF.zip Size: 1.5 GB	Download Link	Download Link2

File Name: Samsung_SM-P605_(P605XXU1EQD1_P605VDIEQA1_Ireland_v5.1.1)_by.zip Size: 1.4 GB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Samsung Galaxy Note 10.1 SM-P605 (SM-P605) should not be confused with other Galaxy Note 10.1 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Note 10.1 line can use completely different processors. Always verify your exact model code “SM-P605” in Settings > About Phone before downloading any firmware from this page.

---

Before You Start: Samsung Galaxy Note 10.1 SM-P605 Requirements

Before beginning the process for the Samsung Galaxy Note 10.1 SM-P605, ensure you have a Windows PC, a working USB cable, and the necessary drivers installed on your computer.

1. IMEI Backup: Open the dialer and enter *#06#. Write both IMEI numbers down on paper or take a screenshot. If you ever need to repair your IMEI after flashing, these are essential.
2. Remove All Google Accounts: Go to Settings, Accounts, and sign out of every Google account on the device. Leaving accounts signed in triggers FRP lock after a flash, which blocks you from setting up the phone.
3. Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
4. Backup Everything: Photos, contacts, messages, WhatsApp data, move it all to a computer or cloud service. The flash will restore the phone to factory state with nothing on it.
5. 50% Battery Minimum: Do not start with a low battery. If power cuts out during the flash, the device can become unresponsive and much harder to fix.
6. USB Cable and Computer: Use a proper data-transfer USB cable and a Windows PC. Avoid USB hubs, connect directly to the motherboard port for a stable connection.
7. Download and Install Drivers:
   • Samsung USB Drivers

---

Flashing Samsung Galaxy Note 10.1 SM-P605 Firmware With Odin

We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.

1. Get the Firmware Ready:
   • Download the firmware file from the download section above.
   • Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like C:firmware.
2. Verify Your Drivers:
   • Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
3. Load the Firmware File:
   • In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
4. Connect Your Device:
   • Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
   • Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
5. Start Flashing:
   • Hit the “Start” button in the flash tool to start the process.
   • Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
6. Wait and Reboot:
   • When the flash completes, unplug the USB cable from your phone.
   • Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.

Video Guide for Flashing

---

What to Expect After Flashing

After successfully flashing the Samsung Galaxy Note 10.1 SM-P605, you will notice a clean factory state, a warm device during the initial boot, and the need to re-register your security settings.

• How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
• Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
• First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
• The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
• Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.

---

Fix Common Samsung Galaxy Note 10.1 SM-P605 Firmware Errors

1. Odin Shows “FAIL” Instead of “PASS”:
   • This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
2. Samsung Galaxy Note 10.1 SM-P605 Not Recognized by Odin:
   • Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
3. KG Lock / Knox Triggered After Flashing:
   • This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
4. Boot Loop After Flashing:
   • Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.

---

Missing IMEI or Corrupt Baseband on Samsung Galaxy Note 10.1 SM-P605 After Flashing?

A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.

Video Guide: How to repair IMEI

---

Frequently Asked Questions

Q1: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close Odin, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.

Q2: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.

Q3: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Note 10.1 SM-P605 running on the Qualcomm Snapdragon 800 (MSM8974AA) Quad-core 2.3 GHz Krait 400 chipset. Even variants of the Galaxy Note 10.1 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.

Q4: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q5: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.

Q6: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Samsung support if you are concerned.

Q7: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.

Q8: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.

People Also Ask About Samsung Galaxy Note 10.1 SM-P605

What chipset does the Samsung Galaxy Note 10.1 SM-P605 use?
The Samsung Galaxy Note 10.1 SM-P605 is powered by the Qualcomm Snapdragon 800 (MSM8974AA) Quad-core 2.3 GHz Krait 400, a Qualcomm processor. Flashing requires QFIL (Qualcomm Flash Image Loader) and Qualcomm HS-USB QDLoader drivers. The device must be in EDL (Emergency Download) mode for firmware installation.

How do I check my Samsung Galaxy Note 10.1 SM-P605 model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy Note 10.1 SM-P605 and look for the model number “SM-P605”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

Can flashing firmware fix a bricked Samsung Galaxy Note 10.1 SM-P605?
Yes. If your Samsung Galaxy Note 10.1 SM-P605 is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.

What is the latest firmware version for Samsung Galaxy Note 10.1 SM-P605?
The latest available Samsung Galaxy Note 10.1 SM-P605 firmware on this page is version the latest version. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

---

Summary

The flash is done. Your Samsung Galaxy Note 10.1 SM-P605 is back on official stock firmware and should be running without the issues that brought you here.

If anything went differently than described, an error message, a step that did not match your setup, post it in the comments. I respond to every question.

This guide gets updated when new builds are released, so you can come back anytime you need a newer version.

Browse all Samsung firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.