Last Updated: June 2, 2026
Restoring your phone to its factory settings requires the correct files and a bit of patience. This page provides the official Samsung Galaxy M01s SM-M017F/DS firmware, along with instructions for hard resets, FRP bypass, and IMEI repair. You will find every step and tool needed to get your phone running normally again.
Device: Samsung Galaxy M01s SM-M017F/DS | Chipset: MediaTek MT6762 Helio P22 | Flash Tool: Odin
Android: Android 9.0 (Pie), One UI Core 1.1 (upgradable to Android 10, One UI 2.1 and Android 11) | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy M01s SM-M017F/DS Firmware (Flash File) Drivers, Tools & Guide
Installing firmware on a Samsung phone using Odin is a simple process when you have the correct files ready. I have gathered all the necessary resources right here, including the exact Odin version and the matching Samsung Galaxy M01s SM-M017F/DS firmware file.
Before you begin, make sure to sign out of any active Samsung accounts. Skipping this step can trigger Knox security, leaving you with a KG lock that takes extra effort to clear. Samsung firmware packages arrive in a .tar.md5 format. Once you extract the ZIP folder, look for files labeled AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If these specific files are missing, the package is incorrect for your device.
Your Samsung Galaxy M01s SM-M017F/DS firmware download will be a compressed ZIP archive. You can extract it using WinRAR or 7-Zip. Inside, you should find the AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 files. If the contents look different, you might have downloaded the wrong package.
Remember that installing stock firmware completely wipes your phone. This is exactly what you want if you are trying to fix software glitches, FRP locks, forgotten patterns, bootloops, or soft brick conditions.
Hard Reset Samsung Galaxy M01s SM-M017F/DS
You can perform a factory reset on the Samsung Galaxy M01s SM-M017F/DS without a computer by holding Volume Up + Power while the phone is powered off. Use the volume buttons to highlight “Wipe Data/Factory Reset” and press the Power button to confirm your choice.
A hard reset returns the Samsung Galaxy M01s SM-M017F/DS to its original factory condition, wiping all personal data. This step usually clears up system lag, app crashes, and minor bootloops. If the phone remains stuck after the reset, you will need to use the Odin flash guide below.
Samsung Galaxy M01s SM-M017F/DS FRP Bypass
The most effective way to bypass FRP on the Samsung Galaxy M01s SM-M017F/DS is by using a free launcher tool to access settings during the initial setup. Google account lock (FRP) often appears after a factory reset or a firmware flash.
You can use our free Android apps launcher to quickly navigate past this lock. Removing your Google account before flashing is always the best practice to prevent this issue entirely.
Why Do We Need Samsung Galaxy M01s SM-M017F/DS Firmware?
Flashing the official Samsung Galaxy M01s SM-M017F/DS firmware is the most reliable way to fix deep software problems, bootloop errors, and update failures. Samsung phones are flashed using Odin, no matter which processor they use.
Installing the official software can resolve a variety of issues:
- Unlock a phone that is disabled or locked.
- Install the most recent Android version available for your hardware.
- Fix freezing, lagging, and continuous bootloops on your SM-M017F/DS Galaxy M01s.
- Correct battery drain and over-the-air (OTA) update failures.
- Return to the official stock ROM to maintain your warranty status.
- Fix a phone that will only boot into recovery mode.
- Clear KG lock or Knox errors caused by an interrupted or incorrect flash.
Learn more about stock ROMs and why flashing works.
Choosing the Right Firmware Version
Selecting the correct firmware version for your phone is critical because flashing the wrong file can cause permanent damage. Take a moment to verify your files before starting the flash.
- Identify Your Exact Model Number: Open Settings › About Phone and check your full model number (such as SM-M017F/DS). The letter at the end is important, U/U1 means USA, W is Canada, N is Korea, and B/F is International. Using the wrong variant causes errors.
- Match the CSC (Region): The firmware filename includes a 3-letter region code that must match your phone. Find your current CSC under Settings › About Phone › Software Information, or check the Service Provider line in Download Mode. Examples include XAA (US), BTU (UK), INS (India), and SER (Russia).
- Check the Binary Level: Look at your current firmware version string (for example,
XXU9BZDP, the number after the letters is the binary level). Samsung devices cannot downgrade to a lower binary. If you are on Binary 9, you must use Binary 9 or higher. - Confirm the Build Date: The last 4 characters of the PDA version show the build date. The first letter represents the year (A=2024, B=2025, C=2026), and the second letter represents the month (A=Jan through L=Dec).
- Verify in Download Mode: Turn off the phone, then press Volume Down + Power to enter Download Mode. This screen displays your exact model, CSC, and current software version for easy verification.
Firmware Details for Samsung Galaxy M01s SM-M017F/DS
The official firmware specifications for the Samsung Galaxy M01s SM-M017F/DS include Android 9.0 (Pie), a MediaTek MT6762 Helio P22 processor, and a file size of 716.82 MB. Here is the complete overview:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy M01s SM-M017F/DS |
| Firmware Version | V00 |
| File Size | 716.82 MB |
| Android Version | Android 9.0 (Pie), One UI Core 1.1 (upgradable to Android 10, One UI 2.1 and Android 11) |
| Platform | MediaTek MT6762 Helio P22 |
| Release Date | Released 2020, July 16 |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
You should download the firmware version that matches your specific situation and current binary level. Choosing the right file can be confusing, so use this table to find the best option for your phone:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | the latest version, download this one. It is the latest Samsung Galaxy M01s SM-M017F/DS firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash the latest version first, then follow the IMEI repair guide. Do not skip the reflash. |
| the latest version failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | the latest version, clean state, fresh start. |
To figure out which Samsung firmware is newer, check the last 4 characters of the PDA version string (for example, S938BXXU9CZDP). The first letter represents the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). Before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy M01s SM-M017F/DS Firmware
You can download the official Samsung Galaxy M01s SM-M017F/DS firmware directly from the links provided below. The newest available build is the latest version. Once the download finishes, double-check that the file size matches the details listed earlier. A mismatched file size usually points to a corrupted download, which will cause problems if you try to flash it.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: COMBINATION_FAC_FA81_J610GUBU1ARI4_FACFAC_CL14321305_QB19776235_REV00_user.rar Size: 716.82 MB | Download Link | Download Link2 |
Always ensure the software matches your exact phone model. See the firmware selection guide above if you are not sure.
- Your model number is a variant of SM-M017F/DS with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from MediaTek MT6762 Helio P22. Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy M01s SM-M017F/DS Firmware
Preparing your computer and phone before opening Odin ensures the Samsung Galaxy M01s SM-M017F/DS firmware installation goes smoothly. Two common issues derail Samsung flashes: forgetting to sign out of Samsung accounts (which triggers KG lock) and using a low-quality USB cable that disconnects halfway through. Grab a high-quality data cable before you begin.
- Back Up IMEI Numbers: Dial *#06# and write down your IMEI numbers. You will need them if the EFS partition gets wiped.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock.
- Remove Samsung Accounts: Sign out of Samsung accounts to avoid triggering KG lock.
- Back Up Your Data: Save your photos, contacts, and files elsewhere. The flash will erase everything.
- Charge Your Device: Ensure the battery is at least 50% full. A power loss during a flash is hard to fix.
- USB Cable & PC: Use a reliable data USB cable and a Windows computer.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy M01s SM-M017F/DS
You can install the Samsung Galaxy M01s SM-M017F/DS firmware by using Odin to send the system files to your phone in Download Mode. Make sure “Auto Reboot” and “F. Reset Time” are checked in Odin for the best results. If you need help picking a version, visit our Odin versions page. Older Samsung phones sometimes respond better to older Odin builds.
- Download and Extract:
- Save the firmware package and extract the ZIP to a simple folder. Avoid folder paths with spaces or special characters.
- Install the Listed Drivers:
- Verify that all drivers listed above are installed and restart your computer. Skipping the restart often causes driver failures.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Do the same for “AP”, “CP”, and “CSC”. Choose HOME_CSC to keep your data, or CSC for a complete wipe.
- Connect Your Device:
- Enter Download Mode by turning off the phone and holding Volume Down + Power (add the Home button for older models). Press Volume Up on the warning screen. Connect the phone to your PC. Odin will display “Added..” when it detects the phone.
- Start Flashing:
- Click “Start” to begin. Leave the phone completely alone until the process finishes. Unplugging the cable now will break the phone.
- Wait and Reboot:
- Disconnect the phone after Odin finishes. Turn it on and wait patiently. The first startup can take up to 8 minutes.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy M01s SM-M017F/DS Firmware
After flashing the Samsung Galaxy M01s SM-M017F/DS firmware, your phone will take several minutes to boot up and will be completely wiped of personal data. Many people worry that the flash failed when it actually worked perfectly. Here is what normally happens:
- How to know the flash was successful: A green “PASS.” message in Odin means the installation finished correctly.
- First boot takes 3 to 8 minutes: Leave the phone alone while it sets up the new system. Interrupting it can cause a bootloop.
- The phone will feel warm during first boot: This is normal behavior and will cool down shortly.
- All your apps are gone: A clean flash removes everything. You can reinstall apps from the Play Store or restore them from a Google backup.
- Dial *#06# immediately after setup: Check your IMEI before inserting a SIM card. If it reads “unknown”, follow the IMEI repair guide.
- Be careful when re-adding your Google account: If you did not remove the account beforehand, you might hit an FRP wall. Enter your details during the setup wizard.
- Wi-Fi, Bluetooth, and mobile data: These features should work immediately. If mobile data fails, manually input your APN in Settings › SIM and Network.
- Stuck in a bootloop after first boot: Perform a factory reset from recovery mode. Check the hard reset guide above. This usually fixes leftover data conflicts.
- Samsung Smart Switch: Your phone might prompt you to install extra updates via Smart Switch. Allow it to finish so your phone gets the newest security patches.
Missing IMEI or Corrupt Baseband on Samsung Galaxy M01s SM-M017F/DS After Flashing?
A missing IMEI on the Samsung Galaxy M01s SM-M017F/DS usually means the EFS partition, which stores your network data, was wiped during the flash. Restoring an IMEI that does not belong to your original phone is illegal in many regions, so only restore your own number.
Programs like ChimeraTool or BFT can repair the EFS partition. Verify your local regulations before proceeding.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy M01s SM-M017F/DS
The most common issues when flashing the Samsung Galaxy M01s SM-M017F/DS are Odin connection failures, “FAIL” messages, and KG lock triggers. Here is how to solve them:
- Odin Shows “FAIL” Instead of “PASS”:
- This typically happens when the firmware does not match your exact model or region. Double-check your model number in Settings › About Phone.
- Samsung Galaxy M01s SM-M017F/DS Not Recognized by Odin:
- Reinstall the Samsung USB drivers and ensure the phone is in Download Mode. Try swapping to a different, higher-quality USB cable.
- KG Lock / Knox Triggered After Flashing:
- This occurs when a Samsung account remains logged in before flashing. You can prevent this by signing out first. Removing an active KG lock usually requires a professional tool.
- Boot Loop After Flashing:
- Boot into recovery mode (Volume Up + Power) and wipe the data. This clears out conflicting files from the previous system.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy M01s SM-M017F/DS firmware erase my data?
A: Yes, installing this firmware with Odin completely wipes the phone and installs Android 9.0 (Pie), One UI Core 1.1 (upgradable to Android 10, One UI 2.1 and Android 11) from scratch. Every app, photo, and contact will disappear. Save your files beforehand because you cannot recover them after the flash.
Q2: Is this firmware compatible with other Samsung models?
A: No, this package is strictly for the Samsung Galaxy M01s SM-M017F/DS with the MediaTek MT6762 Helio P22 processor. Even a slightly different model variant might use different hardware. Flashing the wrong file can ruin your phone, so always verify your exact model in Settings › About Phone.
Q3: Can I downgrade from the latest version to an older firmware version?
A: Downgrading is sometimes possible on MediaTek devices, but it is generally a bad idea. Older software can cause security flaws and app crashes on Android 9.0 (Pie), One UI Core 1.1 (upgradable to Android 10, One UI 2.1 and Android 11). If the newest update is giving you trouble, leave a comment and we can find a safer solution.
Q4: What should I do if I encounter an FRP lock after flashing?
A: You can get past the lock using our free Android apps launcher. FRP activates on the Samsung Galaxy M01s SM-M017F/DS when a Google account is left signed in. Removing the account before flashing is the easiest way to avoid this hurdle.
Q5: Are custom ROM options available for the Samsung Galaxy M01s SM-M017F/DS?
A: This guide only covers official stock software. Whether a custom ROM exists for the Samsung Galaxy M01s SM-M017F/DS depends on developer support for the MediaTek MT6762 Helio P22 chipset. You can check our Custom ROMs page or browse the XDA Developers forum for community-built options.
Q6: My Samsung Galaxy M01s SM-M017F/DS is not detected by Odin. What should I do?
A: Driver issues are usually the culprit. Reinstall the Samsung USB drivers, reboot your computer, and try again. Move the cable to a USB 2.0 port, as Samsung phones often struggle with USB 3.0. Temporarily turn off your antivirus. If it still fails, leave a comment with the error message.
Q7: How do I enter recovery mode on my Samsung Galaxy M01s SM-M017F/DS?
A: Turn the phone completely off. Press and hold Volume Up + Power until the recovery menu loads. If your phone has a physical Home button, press Volume Up + Home + Power instead. The menu will display your current build number so you can verify your Samsung Galaxy M01s SM-M017F/DS software version.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy M01s SM-M017F/DS. Is my phone permanently damaged?
A: Your phone is not broken. The EFS partition likely just needs a repair. Follow the IMEI repair guide above. Wait to put your SIM card back in until the IMEI is fully restored.
Q9: How long does it take to flash Samsung Galaxy M01s SM-M017F/DS firmware?
A: The Odin installation usually finishes in 3 to 10 minutes, depending on your computer and USB speed. The first reboot takes another 3 to 8 minutes. Leave the phone alone during both stages. If the progress bar stops moving, give it a few minutes before you panic.
Final Thoughts on Samsung Galaxy M01s SM-M017F/DS Firmware
You now have all the instructions and files required to successfully install the official Samsung Galaxy M01s SM-M017F/DS firmware (the latest version) using Odin. If you followed the instructions closely, your phone should be running a clean, fresh version of its operating system.
If you ran into an error or a specific step did not work, leave a comment below. Include the exact error message, the step you are on, and what you have tried so far. I check the comments regularly and will help you troubleshoot.
Please share this page if you found it useful, as it helps others fix their phones too.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
