Last Updated: July 20, 2026
This page provides the official stock ROM files, necessary drivers, and a complete walkthrough to restore your Samsung Galaxy J2 J200H to working condition.
Device: Samsung Galaxy J2 J200H | Chipset: Samsung Exynos 3 Quad 3475 (ARM Cortex-A7, Mali-T720) | Flash Tool: Odin
Android: Android 5.1.1 Lollipop | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy J2 J200H (Samsung Exynos 3 Quad 3475 (ARM Cortex-A7, Mali-T720))
Flash Tool: Odin
Latest Build: XXU0AQK2
Firmware Files: 3 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy J2 J200H Firmware (Flash File) Drivers, Tools & Guide
Using Odin to flash Samsung firmware is a standard process, but it requires attention to detail. This guide compiles everything you need: the correct firmware file for the Samsung Galaxy J2 J200H, the appropriate Odin version, and the steps that work reliably.
Before you start, ensure you have signed out of your Samsung account. If you skip this step, Knox will trigger, leading to a KG lock that complicates the process. Samsung firmware arrives as .tar.md5 files; after extracting the ZIP package, you should see files named AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If you do not see these specific files, you likely have the wrong package.
Released in 2015, the Samsung Galaxy J2 J200H requires manual driver installation on newer Windows versions like 10 or 11, as plug-and-play support may not be available. There are three firmware files available for the Samsung Galaxy J2 J200H on this page. Select the one that matches your current Android version for the most stable flash. As a Samsung device, the Samsung Galaxy J2 J200H uses Odin for firmware installation, which is the same tool service centers utilize and is compatible with all Galaxy devices regardless of the chipset.
Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin, which differs from single-file scatter-based tools. This firmware package was sourced directly from verified repositories and checked for integrity before being listed on this page.
Your Samsung Galaxy J2 J200H firmware is compressed as a ZIP file. Download and extract it using WinRAR or 7-Zip. After extraction, you should see files named AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
Flashing replaces your current software completely and wipes all personal data. This is by design, it clears out FRP locks, bootloops, pattern locks, app crashes, and other software-level problems that a regular reset cannot fix.
Bypass Google Lock on Samsung Galaxy J2 J200H
The fastest method to bypass FRP on the Samsung Galaxy J2 J200H involves using a free Android apps launcher that allows access to settings during the setup wizard. After flashing or performing a factory reset, you may encounter a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is why removing your Google account before flashing is recommended, it avoids this problem entirely.
Reset Samsung Galaxy J2 J200H From Recovery Mode
To factory reset the Samsung Galaxy J2 J200H without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores the Samsung Galaxy J2 J200H to its original factory state. This resolves most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Samsung Galaxy J2 J200H Firmware Compatibility Check
The most common error users make is flashing firmware intended for a different variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. J200H). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Why Flash Stock ROM on Samsung Galaxy J2 J200H?
Samsung devices like the Samsung Galaxy J2 J200H are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Restore system apps that were accidentally removed or corrupted.
- Repair a phone that shuts down randomly or restarts in a loop.
- Unlock your device if it has been locked or disabled.
- Restore the original Samsung stock ROM to keep your warranty valid.
- Resolve OTA update failures and battery drain issues.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Samsung Galaxy J2 J200H
The following specifications outline the official firmware details for the Samsung Galaxy J2 J200H:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy J2 J200H |
| Firmware Version | XXU0AOIB, XXU0APG4, XXU0AQK2 |
| File Size | 724.83 MB to 796.46 MB |
| Android Version | Android 5.1.1 Lollipop |
| Platform | Samsung Exynos 3 Quad 3475 (ARM Cortex-A7, Mali-T720) |
| Release Date | Released 2015, September |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | XXU0AQK2, download this one. It is the latest Samsung Galaxy J2 J200H firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try XXU0APG4, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash XXU0AQK2 first, then follow the IMEI repair guide. Do not skip the reflash. |
| XXU0AQK2 failed with a flash error | Try XXU0APG4 instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | XXU0AQK2, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy J2 J200H Firmware
Download the official stock firmware for your Samsung Galaxy J2 J200H below. The latest available version is XXU0AQK2. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: J200HXXU0AOIB_5.1.1_Pre_Rooted.zip Size: 724.83 MB | Download Link | Download Link2 |
| File Name: J200HXXU0APG4_J200HOJV0APG2_OJV_IRAN_5.1.1_4file.zip Size: 758.96 MB | Download Link | Download Link2 |
| File Name: J200HXXU0AQK2_J200HOJV0AQK1_THR.zip Size: 796.46 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy J2 J200H (J200H) should not be confused with other Galaxy J2 variants that may have different chipsets or regional firmware. Even devices in the same Galaxy J2 line can use completely different processors. Always verify your exact model code “J200H” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match J200H exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be Samsung Exynos 3 Quad 3475 (ARM Cortex-A7, Mali-T720). Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Samsung Galaxy J2 J200H Flash Setup Checklist
Go through this list before you open Odin for the Samsung Galaxy J2 J200H. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Save Your IMEI Numbers: Type *#06# in the phone dialer and note down both numbers. These are your device identifiers for the cellular network. If flashing wipes them, you will need the originals to write them back.
- Disconnect Google Accounts: Before you start, remove all Google accounts from the phone. Settings then Accounts then tap each Google account and remove it. This avoids the FRP verification screen that appears after flashing if accounts were still linked.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Create a Backup: Copy your data to your computer or an SD card. Flashing replaces the entire software on the phone, which means all personal data, apps, and settings will be permanently deleted.
- Charge First: Get the battery above 50% before starting. The flashing process takes a few minutes and the first boot takes several more. A power failure during either stage can leave the device in a state that requires more advanced recovery.
- Prepare Your PC Connection: You need a Windows computer and a USB cable that supports data transfer. Test the cable first by connecting the phone normally, if it shows up in File Explorer, the cable is good.
- Install the Right Drivers:
Flashing Samsung Galaxy J2 J200H Firmware With Odin
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Prepare the Flash Files:
- Go to the download section and grab the firmware package that matches your device.
- Unzip the file to a folder on your desktop. Avoid using folder names with non-English characters or spaces, the flash tool may not read them correctly.
- Confirm Driver Setup:
- The drivers listed in prerequisites need to be installed and working before you connect the phone. If you are not sure, reinstall them and restart your computer.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click “Start” to kick off the firmware write.
- Hands off the phone and cable until the tool shows completion. Moving or disconnecting the device mid-flash is the most common cause of a bricked phone.
- Wait and Reboot:
- When you see the success message, disconnect the USB cable.
- Hold the power button to boot the phone. Give it a solid 5 to 8 minutes for the first startup, this is normal.
Video Guide for Flashing
Common Issues When Flashing Samsung Galaxy J2 J200H
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy J2 J200H Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Normal Behavior After Installing Samsung Galaxy J2 J200H Firmware
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
Missing IMEI or Corrupt Baseband on Samsung Galaxy J2 J200H After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Samsung Galaxy J2 J200H Firmware FAQ
Q1: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in Odin appears stuck, give it a few more minutes before assuming something went wrong.
Q2: Will flashing erase my data?
A: Yes, flashing with Odin restores the device to factory state, including Android 5.1.1 Lollipop default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q3: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q4: Can I go back to an older firmware version?
A: It is technically possible on some Exynos builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q5: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy J2 J200H running on the Samsung Exynos 3 Quad 3475 (ARM Cortex-A7, Mali-T720) chipset. Even variants of the Galaxy J2 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q6: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close Odin, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q7: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q8: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
People Also Ask About Samsung Galaxy J2 J200H
What is the latest firmware version for Samsung Galaxy J2 J200H?
The latest available Samsung Galaxy J2 J200H firmware on this page is version XXU0AQK2. This page has 3 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Will flashing firmware on Samsung Galaxy J2 J200H erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy J2 J200H with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
How do I check my Samsung Galaxy J2 J200H model number before flashing?
Go to Settings > About Phone on your Samsung Galaxy J2 J200H and look for the model number “J200H”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Samsung Galaxy J2 J200H?
Yes. If your Samsung Galaxy J2 J200H is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Samsung Galaxy J2 J200H Firmware, Final Notes
That covers the entire flashing process for the Samsung Galaxy J2 J200H. With XXU0AQK2 installed, your device should boot cleanly and be ready for setup.
If you ran into an issue that is not covered here, or if one of the steps did not work the way it should, let me know in the comments. Include the error code or screenshot if you have one.
Bookmark this page if you work on Samsung devices regularly. I keep it updated when new firmware versions come out.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
