Last Updated: June 4, 2026
Getting your SM-E625F Galaxy F62 back to normal is easy when you have the official Samsung Galaxy F62 SM-E625F firmware. This page has every file and guide you need, including hard reset steps, FRP bypass methods, IMEI repair, and the exact flash tools. Do not worry if you are stuck; I have been there, and this guide will walk you through it.
Device: Samsung Galaxy F62 SM-E625F | Chipset: Samsung Exynos 9825 (S5E9825) | Flash Tool: Odin
Android: Android 11, One UI 3.1 (upgradable to Android 13, One UI 5) | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Samsung Galaxy F62 SM-E625F Firmware (Flash File) Drivers, Tools & Guide
Installing the official Samsung Galaxy F62 SM-E625F firmware requires Odin, the correct USB drivers, and the right set of extracted files. Flashing a Samsung phone is a simple process once you understand the basics. I have gathered all the necessary files right here, including the exact Odin version and the correct steps to get your phone running smoothly again.
Before you begin, make sure to sign out of your Samsung account if one is currently active. Skipping this step will trigger Knox security, leaving you with a KG lock that takes much longer to fix. You will also want to check your extracted files. Samsung firmware uses the .tar.md5 format. Once you open the ZIP folder, look for AP_*, BL_*, CP_*, and CSC_* (or HOME_CSC_*). If these are missing, you have downloaded the wrong package.
You will receive the Samsung Galaxy F62 SM-E625F firmware as a compressed ZIP file. Use WinRAR or 7-Zip to extract the contents. Inside, you should find files like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If these specific files are not there, the package might not be right for your phone.
Keep in mind that installing stock firmware will completely wipe your phone. This is exactly what fixes persistent software glitches, including FRP locks, app crashes, sluggish performance, forgotten passwords, devices stuck on the logo, connectivity bugs, battery drain, and soft brick situations.
Hard Reset Samsung Galaxy F62 SM-E625F
You can factory reset the Samsung Galaxy F62 SM-E625F without a computer by powering it off, then holding Volume Up + Power (or Volume Up + Home + Power on older models with a physical home button) until the recovery menu shows up. Use the volume buttons to highlight “Wipe Data/Factory Reset” and press the Power button to confirm.
A hard reset completely wipes your data and returns the Samsung Galaxy F62 SM-E625F to its original factory settings. This solves most common software bugs like random reboots, app failures, lost screen lock PINs, and bootloops. If the trouble continues after the reset, you can move on to the full Odin flash guide below.
Samsung Galaxy F62 SM-E625F FRP Bypass
The fastest way to bypass FRP on the Samsung Galaxy F62 SM-E625F is to use a free Android apps launcher that grants access to settings during the initial setup screen. If you perform a factory reset or flash your phone, you might run into a Google account lock (FRP). You can use our free Android apps launcher to get past it quickly. This is why I always suggest removing your Google account before flashing, it prevents this roadblock entirely.
Why Do We Need Samsung Galaxy F62 SM-E625F Firmware?
Flashing the official Samsung Galaxy F62 SM-E625F firmware using Odin resolves severe software problems, boot issues, and security locks. Samsung phones are flashed with Odin regardless of the internal processor. If you are facing any of the following issues, a software refresh will likely fix it:
- Unlock a disabled or locked handset.
- Upgrade to the most recent Android version available for your specific model.
- Clear up freezing, lagging, and continuous startup loops on your SM-E625F Galaxy F62.
- Fix battery draining rapidly or over-the-air update failures.
- Bring back the original Samsung stock ROM to maintain your warranty status.
- Fix a phone that will only boot into recovery mode.
- Recover from Knox or KG lock errors caused by a paused or incorrect flash.
Read more about stock ROMs and why flashing works.
Choosing the Right Firmware Version
Confirming you have the correct firmware version before flashing prevents serious errors and device malfunctions. Flashing an incompatible file is a tough mistake to undo:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-E625F). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung Galaxy F62 SM-E625F
The official firmware specifications for the Samsung Galaxy F62 SM-E625F include Android 11, One UI 3.1, and the Samsung Exynos 9825 platform. Here is a quick breakdown of the details:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy F62 SM-E625F |
| Firmware Version | E625FDDS6CXE2, E625FDDS5CXA3 |
| File Size | 5.32 GB to 5.91 GB |
| Android Version | Android 11, One UI 3.1 (upgradable to Android 13, One UI 5) |
| Platform | Samsung Exynos 9825 (S5E9825) |
| Release Date | Released 2021, February 22 |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
You should download the firmware version that matches your specific situation, such as E625FDDS6CXE2 for a dead phone or E625FDDS5CXA3 for OTA bug rollbacks. I receive this question frequently, so I created this quick reference table to help you find the right file immediately:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | E625FDDS6CXE2, download this one. It is the latest Samsung Galaxy F62 SM-E625F firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try E625FDDS5CXA3, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash E625FDDS6CXE2 first, then follow the IMEI repair guide. Do not skip the reflash. |
| E625FDDS6CXE2 failed with a flash error | Try E625FDDS5CXA3 instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | E625FDDS6CXE2, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy F62 SM-E625F Firmware
You can download the official Samsung Galaxy F62 SM-E625F firmware directly from the links provided below. The most recent release is E625FDDS6CXE2. Once the download finishes, double-check the file size against the table above. If the sizes do not match, the file is likely corrupted or partially downloaded, which will only create more issues if you try to flash it.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Samsung_F62_SM-E625F_E625FDDS6CXE2_4_File.zip Size: 5.91 GB | Download Link | Download Link2 |
| File Name: Samsung_F62_SM-E625F_E625FDDS5CXA3_4_File.zip Size: 5.91 GB | Download Link | Download Link2 |
| File Name: SM_E625F_INS_E625FDDU4CWF1_4_file.rar Size: 5.32 GB | Download Link | Download Link2 |
| File Name: SM_E625F_E625FDDU2AUI2_F62_4_File.zip Size: 5.69 GB | Download Link | Download Link2 |
| File Name: SM_E625F_E625FDDU1AUG1_F62_4_File.zip Size: 5.68 GB | Download Link | Download Link2 |
Always ensure you are downloading firmware that fully matches your exact phone model. See the firmware selection guide above if you are not sure.
- Your model number is a variant of SM-E625F with a different letter suffix. Check About Phone carefully, one letter difference can cause a failed or broken flash.
- Your chipset differs from Samsung Exynos 9825 (S5E9825). Confirm in recovery mode before proceeding.
- You downloaded the file from a source other than this page.
- The file size differs significantly from the sizes listed in the table above, a size mismatch usually means a partial download, which will fail mid-flash.
Prerequisites for Samsung Galaxy F62 SM-E625F Firmware
Before installing the Samsung Galaxy F62 SM-E625F firmware, you must back up your data, remove all accounts, and install the proper USB drivers. Two things tend to trip people up with Samsung phones: forgetting to sign out of a Samsung account (which triggers KG lock) and using a low-quality USB cable that disconnects halfway through the flash. Always rely on a high-quality data cable for this process.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
How to Install Firmware on Samsung Galaxy F62 SM-E625F
You install firmware on the Samsung Galaxy F62 SM-E625F by using the Odin flash tool to load the AP, BL, CP, and CSC files while the phone is in Download Mode. We will be using Odin for this task. A helpful tip: leave “Auto Reboot” and “F. Reset Time” checked in Odin to ensure the cleanest installation. If you are unsure which version of Odin to grab, visit our Odin versions page. Sometimes older Samsung phones respond better to older Odin builds.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click the “Start” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Video Guide for Flashing
What to Expect After Flashing Samsung Galaxy F62 SM-E625F Firmware
After flashing the Samsung Galaxy F62 SM-E625F firmware, you should expect a longer first boot time, a warm device, and the complete removal of your previous apps and data. Many people ask me if something went wrong when it actually did not. Here is what is perfectly normal after a successful flash:
- How to know the flash was successful: Look for “PASS.” in green text inside the Odin log box. Seeing this means the process completed perfectly.
- First boot takes 3 to 8 minutes, do not force the phone to restart. The system is building itself from scratch, and interrupting this can cause a bootloop.
- The phone will feel warm during first boot, this is expected behavior. It will cool down once the initial setup finishes.
- All your apps are gone, this is standard. You will need to download them again from the Play Store. If you had Google backup enabled, it will help you restore your apps during the setup wizard.
- Dial *#06# immediately after setup to verify your IMEI status. Do this before inserting a SIM card. If it displays “unknown” or “null”, follow the IMEI repair guide below right away.
- Be careful when re-adding your Google account, if you forgot to remove it prior to flashing, you might hit an FRP prompt. Add it directly during the setup wizard rather than through the Settings menu later.
- Wi-Fi, Bluetooth, and mobile data should function right out of the box. If mobile data fails, navigate to Settings › SIM and Network and input your APN details manually, as the flash can sometimes wipe carrier settings.
- Stuck in a bootloop after first boot? Boot into recovery mode and perform a factory reset from there, check the hard reset guide above. This happens occasionally and usually just means there is leftover data conflicting with the new system.
- Samsung Smart Switch: Once the Samsung Galaxy F62 SM-E625F firmware is installed, Samsung Smart Switch might suggest installing extra updates. Allow it to finish so your phone gets the correct security patches for your region.
Missing IMEI or Corrupt Baseband on Samsung Galaxy F62 SM-E625F After Flashing?
A missing IMEI or corrupt baseband on the Samsung Galaxy F62 SM-E625F after flashing usually indicates a corrupted EFS partition. This specific partition holds your IMEI and network details. Please remember that writing a fake IMEI is illegal in many areas, so only restore the original number that came with your phone. Programs like ChimeraTool or BFT can assist with this repair. Check your local regulations before moving forward.
Video Guide: How to repair IMEI
Common Issues When Flashing Samsung Galaxy F62 SM-E625F
- Odin Shows “FAIL” Instead of “PASS”:
- This generally happens if the firmware region or model does not match your phone. Verify your precise model number in Settings › About Phone before choosing a file. Even one wrong letter in the model code will cause an error.
- Samsung Galaxy F62 SM-E625F Not Recognized by Odin:
- Install the Samsung USB drivers again. Ensure the phone is actually in Download Mode. Swap to a different USB cable, as Odin is sometimes picky about connection quality.
- KG Lock / Knox Triggered After Flashing:
- This occurs when a Samsung account remained logged in prior to flashing, or if unofficial software was installed. Always log out of Samsung accounts beforehand. If KG lock is already active, you typically need a specialized unlocking tool.
- Boot Loop After Flashing:
- Open recovery mode (Volume Up + Power) and execute a factory reset. This wipes out residual data from the older firmware that might be causing the clash.
Frequently Asked Questions
Q1: Will flashing the Samsung Galaxy F62 SM-E625F firmware erase my data?
A: Yes, installing this firmware with Odin resets your phone to its factory defaults, including the original Android 11, One UI 3.1 (upgradable to Android 13, One UI 5) configurations. Every app, photo, contact, and account will be deleted. Save anything important before you begin. You cannot retrieve data once the flash finishes.
Q2: Is this firmware compatible with other Samsung models?
A: No, this specific firmware is designed exclusively for the Samsung Galaxy F62 SM-E625F using the Samsung Exynos 9825 (S5E9825) processor. Even a slightly different variant of the SM-E625F could have entirely different internal hardware. Installing the wrong software can severely damage your phone. Always confirm your exact model in Settings › About Phone.
Q3: Can I downgrade from E625FDDS6CXE2 to an older firmware version?
A: While it is sometimes possible on certain Exynos builds, I advise against it. Rolling back can introduce security vulnerabilities and app instability on Android 11, One UI 3.1 (upgradable to Android 13, One UI 5). If E625FDDS6CXE2 is giving you trouble, leave a comment below, and we can find a better solution than downgrading.
Q4: What should I do if I encounter an FRP lock after flashing?
A: You can use our free Android apps launcher. FRP activates on the Samsung Galaxy F62 SM-E625F when a Google account was left signed in before the flash. This is why I always recommend logging out of your Google account prior to flashing, it prevents the lock entirely.
Q5: Are custom ROM options available for the Samsung Galaxy F62 SM-E625F?
A: This tutorial focuses solely on official Samsung stock firmware. Whether custom ROMs exist for the Samsung Galaxy F62 SM-E625F depends on if the Samsung Exynos 9825 (S5E9825) chipset has open-source kernel support. You can check our Custom ROMs page or browse the XDA Developers forum for specific custom ROM threads.
Q6: My Samsung Galaxy F62 SM-E625F is not detected by Odin. What should I do?
A: Start by checking your drivers, reinstall the Samsung USB drivers, reboot your computer, and try again. Move to a USB 2.0 port if you are currently using USB 3.0, as Samsung phones often connect more reliably to 2.0 ports. Temporarily turn off your antivirus software. If it still fails, leave a comment below with the exact error message, and I will help you troubleshoot.
Q7: How do I enter recovery mode on my Samsung Galaxy F62 SM-E625F?
A: Turn the phone off entirely, then press and hold Volume Up + Power together until the recovery menu pops up. On older Samsung devices with a physical Home button, press Volume Up + Home + Power. The recovery screen will display the build number for your Samsung Galaxy F62 SM-E625F, which helps you verify your current software version before flashing.
Q8: My IMEI shows “unknown” after flashing the Samsung Galaxy F62 SM-E625F. Is my phone permanently damaged?
A: No, it looks scary, but it is usually repairable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung phones, always check the EFS partition for corruption first. Make sure you do not insert a SIM card until the IMEI is fully restored.
Q9: How long does it take to flash Samsung Galaxy F62 SM-E625F firmware?
A: The actual flashing procedure generally takes 3 to 10 minutes, depending on the file size and your USB transfer speed. The initial boot after flashing takes a bit longer, usually between 3 and 8 minutes. Do not unplug the phone during either phase. If the Odin progress bar seems frozen, wait a few extra minutes before assuming something went wrong.
Final Thoughts on Samsung Galaxy F62 SM-E625F Firmware
The Samsung Galaxy F62 SM-E625F firmware provides a reliable way to restore your device to full working condition using Odin. If you followed the instructions carefully, your phone should now be running a fresh, clean build of E625FDDS6CXE2.
If you ran into a hiccup, perhaps an error message or a step that did not work, leave a comment below. Please include as much detail as possible, like the exact error code, the step you are on, and what you have already attempted. I read every comment and will gladly help you sort it out.
If this guide made things easier for you, please consider sharing it. It is a great way to help someone else who might be facing the exact same problem.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
