Last Updated: July 1, 2026
This guide provides the official Samsung Galaxy Core Prime SM-G361F firmware to fix boot issues, bypass FRP locks, or restore a device to a clean state. The page includes the necessary drivers, tools, and step-by-step instructions to perform a standard flash or a factory reset.
Device: Samsung Galaxy Core Prime SM-G361F | Chipset: Qualcomm MSM8916 Snapdragon 410 | Flash Tool: Odin
Android: Android 5.1.1 (Lollipop) | File Type: .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin)
⚠ Warning: Flashing erases all data. Back up first.
Device: Samsung Galaxy Core Prime SM-G361F (Qualcomm MSM8916 Snapdragon 410)
Flash Tool: Odin
Latest Build: XXU1AOL1
Firmware Files: 1 available
What You Need: Windows PC, USB data cable, Odin, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Samsung Galaxy Core Prime SM-G361F Firmware (Flash File) Drivers, Tools & Guide
Flashing Samsung firmware with Odin is usually a simple process once you understand the steps. I have gathered the correct Samsung Galaxy Core Prime SM-G361F firmware, the right Odin version, and the instructions that work together on this page.
Before you start, check that you have the correct files. The firmware package should contain files named AP_*, BL_*, CP_*, and CSC_*. If you do not see these names, you have the wrong package. Also, make sure to sign out of any Samsung accounts before flashing. If you skip this, Knox will trigger, and you will have to deal with a KG lock later.
Only one firmware build is currently available for the Samsung Galaxy Core Prime SM-G361F. This is the stock ROM you should use for recovery, unbricking, or bypassing the FRP lock. The stock firmware ships with Android 5.1.1 (Lollipop), which determines the default apps, security features, and interface you will see after flashing. The Samsung Galaxy Core Prime SM-G361F was originally released in 2014, which means USB driver compatibility on newer Windows versions (10/11) may require manual installation rather than plug-and-play.
The Samsung Galaxy Core Prime SM-G361F was released in 2014. This page is maintained with the latest available firmware builds as they become available. Samsung firmware uses a multi-file system (AP, BL, CP, CSC) specific to Odin-based flashing, which differs from single-file scatter-based tools.
Your Samsung Galaxy Core Prime SM-G361F firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. After extracting, you should see files named like AP_*.tar.md5, BL_*.tar.md5, CP_*.tar.md5, and CSC_*.tar.md5 (or HOME_CSC_*.tar.md5). If you do not see these files, you may have the wrong firmware package for your device.
Keep in mind that flashing stock firmware erases all data, which is intentional, as it resolves software issues including FRP lock, app problems, slow performance, forgotten pattern locks, a dead or logo-stuck device, Wi-Fi and Bluetooth issues, battery drain, and soft brick situations.
How to Wipe Samsung Galaxy Core Prime SM-G361F to Factory Settings
To factory reset Samsung Galaxy Core Prime SM-G361F without a computer, power off the device completely, then hold Volume Up + Power (for older models with a Home button, use Volume Up + Home + Power) at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Samsung Galaxy Core Prime SM-G361F to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using Odin is covered in the following sections.
Samsung Galaxy Core Prime SM-G361F Google Account Bypass After Reset
The fastest way to bypass FRP on Samsung Galaxy Core Prime SM-G361F is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Why Flash Stock ROM on Samsung Galaxy Core Prime SM-G361F?
Samsung devices like the Samsung Galaxy Core Prime SM-G361F are flashed using Odin, regardless of the chipset inside. Whether you are dealing with a boot issue or a software problem, flashing the official firmware can resolve it:
- Unlock your device if it has been locked or disabled.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Remove persistent malware or adware that survives a factory reset.
- Resolve OTA update failures and battery drain issues.
- Fix startup loops, lagging, and freezing on your device.
- Recover from KG lock or Knox-related issues after an incorrect or interrupted flash on your device.
Learn more about stock ROMs and why flashing works.
How to Pick the Correct Samsung Galaxy Core Prime SM-G361F Firmware
The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Identify Your Exact Model Number: Go to Settings › About Phone and note your full model number (e.g. SM-G361F). The letter suffix matters, U/U1 = USA, W = Canada, N = Korea, B/F = International/Global. Flashing firmware built for a different variant can cause issues.
- Match the CSC (Region): The 3-letter region code in the firmware filename must match your device. Check Settings › About Phone › Software Information for your current CSC, or look at the Service Provider line in Download Mode. Common codes: XAA (US), BTU (UK), INS (India), SER (Russia).
- Check the Binary Level: Look at the version string in your current firmware (e.g.
XXU9BZDP, the number after the letters is the binary level). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher firmware. - Confirm the Build Date: The last 4 characters of the PDA version encode the build date, first character is the year (A=2024, B=2025, C=2026), second is the month (A=Jan through L=Dec).
- Verify in Download Mode: Power off, hold Volume Down + Power to enter Download Mode. This screen shows your exact model, CSC, and current firmware version, use this to confirm before flashing.
Firmware Details for Samsung Galaxy Core Prime SM-G361F
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Samsung Galaxy Core Prime SM-G361F |
| Firmware Version | XXU1AOL1 |
| File Size | 744.6 MB |
| Android Version | Android 5.1.1 (Lollipop) |
| Platform | Qualcomm MSM8916 Snapdragon 410 |
| Release Date | Released 2014, November |
| Region | Global, Africa and Asia |
| File Type | .tar.md5 / ZIP (Contains AP, BL, CP, CSC files for Odin) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | XXU1AOL1, download this one. It is the latest Samsung Galaxy Core Prime SM-G361F firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Not sure which region/CSC to download | Check Settings › About Phone › Software Information for your current CSC, or enter Download Mode (Volume Down + Power), it shows the CSC on screen. Match the 3-letter code (e.g. XAA, BTU, INS) to the firmware filename. |
| Phone slow after a recent OTA update | Try the next older version, sometimes the latest OTA introduces new bugs and an older build runs better. Make sure the binary level is the same or higher than what your device currently has. |
| IMEI missing after a previous flash | Re-flash XXU1AOL1 first, then follow the IMEI repair guide. Do not skip the reflash. |
| XXU1AOL1 failed with a flash error | Try the next older version instead and double-check your AP/BL/CP/CSC file assignments in Odin before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | XXU1AOL1, clean state, fresh start. |
To tell which Samsung firmware is newer, look at the last 4 characters of the PDA version string (e.g. S938BXXU9CZDP). The first character is the year (A=2024, B=2025, C=2026), the second is the month (A=Jan, B=Feb… L=Dec, Z=final stable), and the last two are the revision (0-9 then A-Z, where Z is highest). But before comparing dates, always check the binary level: the digit just before the date code (e.g. XXU9CZDP = Binary 9). You cannot downgrade to a lower binary level. If your device is on Binary 9, only flash Binary 9 or higher. Also make sure the 3-letter CSC code in the firmware matches your device region.
Download Samsung Galaxy Core Prime SM-G361F Firmware
Download the official stock firmware for your Samsung Galaxy Core Prime SM-G361F below. The latest available version is XXU1AOL1. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: G361FXXU1AOL1_G361FOXX1AOL2_SEB.zip Size: 744.6 MB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Samsung Galaxy Core Prime SM-G361F (SM-G361F) should not be confused with other Galaxy Core Prime variants that may have different chipsets or regional firmware. Even devices in the same Galaxy Core Prime line can use completely different processors. Always verify your exact model code “SM-G361F” in Settings > About Phone before downloading any firmware from this page.
- The model code on your phone must match SM-G361F exactly. Even a single letter variant (like adding or dropping an “i” or “s”) can mean a different chipset inside.
- Your chipset should be Qualcomm MSM8916 Snapdragon 410. Recovery mode shows this information if you are not sure.
- Do not mix firmware from other download sites with the files on this page.
- If the downloaded file is much smaller than what is listed in the table above, re-download it, partial files will fail.
Before You Start: Samsung Galaxy Core Prime SM-G361F Requirements
Go through this list before you open Odin for the Samsung Galaxy Core Prime SM-G361F. Two things that commonly cause problems with Samsung devices: a Samsung account that was not signed out before flashing, which can trigger KG lock, and a USB cable that works for charging but drops the connection mid-flash. Always use a proper data cable, not a charge-only cable.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Remove Samsung Accounts: Sign out of all Samsung accounts to avoid KG lock.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Flashing Samsung Galaxy Core Prime SM-G361F Firmware With Odin
We are using Odin for this. A quick tip: keep “Auto Reboot” and “F. Reset Time” both checked in Odin, those two options together give you the cleanest flash result. If you are not sure which Odin version to use, check our Odin versions page. Some older Samsung devices work better with older Odin builds.
- Download and Extract:
- Download the correct firmware package from the links above.
- Extract the ZIP to a simple folder path, avoid paths with spaces or special characters, as some flash tools have trouble with them.
- Install the Listed Drivers:
- Confirm all drivers listed above are installed and that your PC has been restarted since installation. Skipping the restart is a common reason drivers do not work correctly.
- Load the Firmware File:
- In Odin, click “BL” and select the BL_*.tar.md5 file. Click “AP” and select the AP_*.tar.md5 file. Repeat for “CP” and “CSC”. Use HOME_CSC to keep data, or CSC for a clean flash.
- Connect Your Device:
- Enter Download Mode: Turn off your phone, then hold Volume Down + Power (add Home button on older models) until the warning screen appears. Press Volume Up to confirm and enter Download Mode.
- Connect your phone to your PC via USB. Odin should show “Added..” in the log area, this means your device is detected.
- Start Flashing:
- Click the “Start” button to begin.
- Do not disconnect, move the cable, or touch the device until the process is fully complete. Disconnecting mid-flash is how devices get bricked.
- Wait and Reboot:
- Once flashing finishes successfully, disconnect the device.
- Power on your device. The first boot will take longer than usual, give it up to 8 minutes.
Video Guide for Flashing
Post-Flash Behavior on Samsung Galaxy Core Prime SM-G361F
Here is what is completely normal after a successful flash:
- How to know the flash was successful: Odin will show “PASS.” in green text at the top-left of the log area. If you see this, everything went fine.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
Fix Common Samsung Galaxy Core Prime SM-G361F Firmware Errors
- Odin Shows “FAIL” Instead of “PASS”:
- This is usually a mismatch between the firmware region or model and your device. Confirm your exact model number in Settings › About Phone before selecting the firmware. Even a single letter difference in the model code matters.
- Samsung Galaxy Core Prime SM-G361F Not Recognized by Odin:
- Reinstall the Samsung USB drivers. Make sure you are in Download Mode. Try a different USB cable, Odin can be sensitive to cable quality.
- KG Lock / Knox Triggered After Flashing:
- This happens when a Samsung account was still signed in before flashing, or when unofficial firmware was used. Always sign out of Samsung accounts before flashing. If KG lock is already active, a professional unlocking tool is generally needed.
- Boot Loop After Flashing:
- Enter recovery mode (Volume Up + Power) and perform a factory reset. This clears any leftover data from the previous firmware that may be causing the conflict.
Missing IMEI or Corrupt Baseband on Samsung Galaxy Core Prime SM-G361F After Flashing?
A missing IMEI on a Samsung device after flashing usually points to a corrupted EFS partition, this is the partition that stores your IMEI and carrier settings. Note that restoring an IMEI that is not your original number is illegal in most countries, so only do this if you are restoring the number the device had before you flashed. Tools like ChimeraTool or BFT can help with this. Check your local laws before proceeding.
Video Guide: How to repair IMEI
Common Questions About Flashing Samsung Galaxy Core Prime SM-G361F
Q1: Can I use a Mac or Linux computer for this?
A: Samsung firmware can be flashed using Heimdall on Linux or Mac, but the instructions on this page are written for Odin on Windows. If you only have a Mac, you may want to use a Windows virtual machine or Boot Camp for the most straightforward experience.
Q2: Is it safe to flash during a power outage risk?
A: It is best to avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone in an unbootable state. If you are in an area with unreliable power, use a laptop with a fully charged battery instead of a desktop.
Q3: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. For older Samsung models with a physical Home button, use Volume Up + Home + Power. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q4: Is this firmware compatible with other Samsung models?
A: No. This firmware is built specifically for the Samsung Galaxy Core Prime SM-G361F running on the Qualcomm MSM8916 Snapdragon 410 chipset. Even variants of the Galaxy Core Prime with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.
Q5: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. Samsung devices can usually enter Download Mode even when the screen is completely dead, hold Volume Down + Power for 10 seconds. If the battery is completely drained, charge it for at least 15 minutes first.
Q6: Can I go back to an older firmware version?
A: It is technically possible on some Qualcomm builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
Q7: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For Samsung devices, check for EFS partition corruption first. Do not insert a SIM card until the IMEI is restored.
Q8: My device is not detected by Odin. What should I do?
A: Start with the drivers, reinstall the Samsung USB drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
People Also Ask About Samsung Galaxy Core Prime SM-G361F
Will flashing firmware on Samsung Galaxy Core Prime SM-G361F erase my data?
Yes. Flashing stock firmware on the Samsung Galaxy Core Prime SM-G361F with Odin performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
What is the latest firmware version for Samsung Galaxy Core Prime SM-G361F?
The latest available Samsung Galaxy Core Prime SM-G361F firmware on this page is version XXU1AOL1. This page has 1 firmware build available for download. Check the firmware details table above for file sizes and Android versions.
What chipset does the Samsung Galaxy Core Prime SM-G361F use?
The Samsung Galaxy Core Prime SM-G361F is powered by the Qualcomm MSM8916 Snapdragon 410, a Qualcomm processor. Flashing requires QFIL (Qualcomm Flash Image Loader) and Qualcomm HS-USB QDLoader drivers. The device must be in EDL (Emergency Download) mode for firmware installation.
Can flashing firmware fix a bricked Samsung Galaxy Core Prime SM-G361F?
Yes. If your Samsung Galaxy Core Prime SM-G361F is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with Odin can restore it to working condition. This is the standard repair method used by service centers for Samsung devices.
Conclusion
The flash is done. Your Samsung Galaxy Core Prime SM-G361F is back on official stock firmware and should be running without the issues that brought you here.
If anything went differently than described, an error message, a step that did not match your setup, post it in the comments. I respond to every question.
This guide gets updated when new builds are released, so you can come back anytime you need a newer version.
Browse all Samsung firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
