Last Updated: August 21, 2026
Use the official Infinix Note 12 Pro X676B firmware to resolve software issues on your device. This page contains the necessary flash files, drivers, and step-by-step instructions for fixing bootloops, FRP locks, and other software glitches.
Device: Infinix Note 12 Pro X676B | Chipset: MediaTek MT6789 Helio G99 | Flash Tool: SP Flash Tool
Android: Android 12, XOS 10.6 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Note 12 Pro X676B (MediaTek MT6789 Helio G99)
Flash Tool: SP Flash Tool
Latest Build: V2747
Firmware Files: 7 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Note 12 Pro X676B Firmware (Flash File) Drivers, Tools & Guide
The Infinix Note 12 Pro X676B is a device I see frequently in my repair queue, often presenting with bootloop problems, FRP lock issues, or being stuck on the boot logo. This guide consolidates the necessary tools and firmware into a single resource.
One tip I always recommend before you start: extract the firmware to a simple folder path, something like C:FirmwareX676B. SP Flash Tool can sometimes have trouble locating the scatter file if the folder path contains spaces or special characters. It is a small thing, but it saves a frustrating few minutes of wondering why the tool is not loading the file.
Released in 2022, the Infinix Note 12 Pro X676B runs on the MediaTek MT6789 Helio G99 chipset. This means you must use SP Flash Tool and VCOM drivers for any firmware operations. The stock operating system is Android 12 with XOS 10.6. Because this is a relatively older device, USB driver installation on newer Windows versions may require manual steps rather than automatic detection.
We have verified the integrity of these firmware files through multiple sources to ensure they are authentic stock ROMs. Infinix devices, particularly those in the Note 12 Pro series, share similar architectural foundations, which is why this specific firmware works for the X676B model.
The firmware package is a compressed ZIP file. You will need to extract it using WinRAR or 7-Zip. After extraction, check that the scatter file is present before proceeding with the flashing process.
A full flash will erase everything on the device: apps, accounts, photos, and settings. That is the point, it gives you a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
Infinix Note 12 Pro X676B FRP Bypass
The quickest method to bypass the Factory Reset Protection (FRP) lock on the Infinix Note 12 Pro X676B involves using an Android apps launcher during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Hard Reset Infinix Note 12 Pro X676B
To perform a factory reset on the Infinix Note 12 Pro X676B without a computer, power the device off completely, then simultaneously press Volume Up and Power until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Infinix Note 12 Pro X676B to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
Which Firmware Version Does Your Infinix Note 12 Pro X676B Need?
Before downloading anything, verify your exact device identity to ensure compatibility.
- Check About Phone: Open Settings and find your exact model number. It should read “X676B”, not a similar name, the exact code.
- Match the Chipset: This firmware is built for MediaTek MT6789 Helio G99. If your device has a different processor, it will not flash correctly.
- Look at the Build Number: The build string in your current software should reference the Note 12 Pro line. Cross-check it with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
- Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.
Why Do We Need Infinix Note 12 Pro X676B Firmware?
The stock firmware is essential for restoring the Infinix Note 12 Pro X676B to its original state, especially when software issues arise.
- Unlock your device if it has been locked or disabled.
- Remove persistent malware or adware that survives a factory reset.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Resolve OTA update failures and battery drain issues.
- Restore the original Infinix stock ROM to keep your warranty valid.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Note 12 Pro X676B
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Note 12 Pro X676B |
| Firmware Version | V1919, V2020, V2747, V2089 |
| File Size | 5 GB to 5.08 GB |
| Android Version | Android 12, XOS 10.6 |
| Platform | MediaTek MT6789 Helio G99 |
| Release Date | Released 2022, July 18 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V2747, download this one. It is the latest Infinix Note 12 Pro X676B firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V2089, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V2747 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V2747 failed with a flash error | Try V2089 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V2747, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Infinix Note 12 Pro X676B Firmware
Download the official stock firmware for your Infinix Note 12 Pro X676B below. The latest available version is V2747. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Note_12_Pro_X676B_MT6789_V1919_220923.zip Size: 5 GB | Download Link | Download Link2 |
| File Name: Infinix_Note_12_Pro_X676B_MT6789_V2020_221010.zip Size: 5 GB | Download Link | Download Link2 |
| File Name: Infinix Note 12 Pro X676B Firmware (firmwarefile) Size: 5 GB | Download Link | Download Link2 |
| File Name: X676B-H891GHI-S-GL-230207V2747.zip Size: 5.08 GB | Download Link | Download Link2 |
| File Name: X676B-H891GHI-S-GL-221020V2089.zip Size: 5.02 GB | Download Link | Download Link2 |
| File Name: X676B-H891GHI-S-GL-221010V2020.zip Size: 5.02 GB | Download Link | Download Link2 |
| File Name: X676B-H891GHI-S-GL-220923V1919.zip Size: 5.01 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Note 12 Pro X676B (X676B) should not be confused with other Note 12 Pro variants that may have different chipsets or regional firmware. Even devices in the same Note 12 Pro line can use completely different processors. Always verify your exact model code “X676B” in Settings > About Phone before downloading any firmware from this page.
- Open About Phone and make sure the model code reads X676B. Do not rely on the name printed on the phone case.
- Verify the chipset is MediaTek MT6789 Helio G99. You can see this in recovery mode or by checking the device specifications online.
- Use only the download links provided on this page.
- After downloading, right-click the file and check Properties to confirm the size matches the table above. If it does not, download it again.
Infinix Note 12 Pro X676B Flash Setup Checklist
Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Note 12 Pro X676B and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Write Down Your IMEI: Open your phone dialer and type *#06#. Take a photo of the screen showing both IMEI numbers. You may need these later to fix your IMEI if it gets wiped during the flash.
- Sign Out of Google: Open Settings, go to Accounts, and remove every Google account from the device. If you skip this, Google will lock the phone after flashing and you will need to do an FRP bypass.
- Save Your Files: Copy everything important to a PC or cloud storage. After flashing, the phone will be completely empty, no apps, no photos, no messages.
- Battery Check: Charge to at least 50%. If the phone dies during flashing, you could end up with a device that will not turn on at all.
- Get the Right Cable: You need a USB data cable, the kind that can transfer files, not just charge. Plug it into a USB 2.0 port on a Windows PC for the most reliable connection.
- Set Up Drivers:
Step-by-Step: Flash Infinix Note 12 Pro X676B Stock ROM
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download the Firmware Package:
- Use the download links in the table above to get the correct firmware file for your device.
- Extract the archive with WinRAR or 7-Zip. Use a short folder path like
D:flashto avoid issues with some tools.
- Check Drivers:
- All drivers from the prerequisites must be installed before connecting your device. Restart your computer after installing them.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Press “Download” to begin writing the firmware to your device.
- Do not unplug the phone, close the flash tool, or interact with the device until the process is 100% complete.
- Wait and Reboot:
- After the tool confirms the flash is complete, safely disconnect your phone.
- Press the power button to start your device. The initial boot is slow, wait up to 8 minutes before assuming there is a problem.
Fix Common Infinix Note 12 Pro X676B Firmware Errors
- Infinix Note 12 Pro X676B Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X676B, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
Post-Flash Behavior on Infinix Note 12 Pro X676B
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
- Dial *#06# immediately after setup to check your IMEI. Do this before you insert a SIM card. If it shows “unknown” or “null”, follow the IMEI repair guide below before doing anything else.
- All your apps are gone, this is expected. Reinstall them from the Play Store. If you had a Google account backup active, it will offer to restore your apps automatically during setup.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
Missing IMEI or Corrupt Baseband on Infinix Note 12 Pro X676B After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Infinix Note 12 Pro X676B Firmware FAQ
Q1: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q2: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.
Q3: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q5: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
Q6: Will flashing erase my data?
A: Yes, flashing with SP Flash Tool restores the device to factory state, including Android 12, XOS 10.6 default settings. All apps, photos, contacts, and accounts will be removed. Back up everything you need before you start. There is no way to recover data once the flash is complete.
Q7: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.
Q8: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
People Also Ask About Infinix Note 12 Pro X676B
What chipset does the Infinix Note 12 Pro X676B use?
The Infinix Note 12 Pro X676B uses the MediaTek MT6789 Helio G99 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
Can flashing firmware fix a bricked Infinix Note 12 Pro X676B?
Yes. If your Infinix Note 12 Pro X676B is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
Will flashing firmware on Infinix Note 12 Pro X676B erase my data?
Yes. Flashing stock firmware on the Infinix Note 12 Pro X676B with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.
What is the latest firmware version for Infinix Note 12 Pro X676B?
The latest available Infinix Note 12 Pro X676B firmware on this page is version V2747. This page has 7 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Conclusion
Your Infinix Note 12 Pro X676B should now be running V2747 on a clean build. If the first boot takes a while, do not worry, that is completely normal after a fresh flash.
Ran into something unexpected? Leave a comment and describe what happened. Include which step you were on and what error you saw. I will get back to you.
Consider sharing this guide with anyone else who has a Infinix device that needs fixing.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
