Last Updated: August 16, 2026
If your Infinix Hot 20i X665E is not responding or stuck on a logo, you can restore it with the right files. This page provides the stock firmware, necessary drivers, and a step-by-step guide to get your phone running again. I have included resources for FRP bypass and IMEI repair as well.
Device: Infinix Hot 20i X665E | Chipset: MediaTek MT6765 Helio P35/G35 | Flash Tool: SP Flash Tool
Android: Android 12, XOS 10.6 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Hot 20i X665E (MediaTek MT6765 Helio P35/G35)
Flash Tool: SP Flash Tool
Latest Build: V1711
Firmware Files: 8 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Hot 20i X665E Firmware (Flash File) Drivers, Tools & Guide
The Infinix Hot 20i X665E is a device I see often in my work. It usually arrives with screen locks, bootloops, or a stuck logo. This guide puts the necessary files and steps in one place so you can get your phone back to normal.
Before you start, extract the firmware to a simple folder like C:FirmwareX665E. SP Flash Tool can struggle to find the scatter file if the path has spaces or special characters. It is a small step, but it saves time.
This device launched in 2022. Because of its age, you might need to install drivers manually on newer Windows versions. There are eight different firmware builds available here, so if one does not work, try another. The Infinix Hot 20i X665E runs on a MediaTek MT6765 Helio P35/G35 chipset, so you will use SP Flash Tool and VCOM/MTK drivers for flashing. These are included in the prerequisites below.
We verified firmware file integrity across two independent sources to confirm these are authentic, unmodified stock ROMs. The Infinix Hot 20i X665E was released in 2022. This page is maintained with the latest available firmware builds as they become available.
Your Infinix Hot 20i X665E firmware comes as a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and confirm it contains the scatter file before proceeding.
A full flash will erase everything on the device: apps, accounts, photos, and settings. That is the point, it gives you a clean slate and resolves issues like screen locks, FRP prompts, dead boot states, sluggish performance, and connectivity problems.
FRP Removal for Infinix Hot 20i X665E
The fastest way to bypass FRP on Infinix Hot 20i X665E is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.
Hard Reset Infinix Hot 20i X665E
To factory reset Infinix Hot 20i X665E without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.
A hard reset erases all data and restores Infinix Hot 20i X665E to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.
How to Pick the Correct Infinix Hot 20i X665E Firmware
The most common error people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:
- Check About Phone: Open Settings and find your exact model number. It should read “X665E”, not a similar name, the exact code.
- Match the Chipset: This firmware is built for MediaTek MT6765 Helio P35/G35. If your device has a different processor, it will not flash correctly.
- Look at the Build Number: The build string in your current software should reference the Hot 20i line. Cross-check it with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays your chipset and current build, use this to confirm.
- Compare File Details: Make sure the version listed in the download table matches what you expect for your device and region.
Why Do We Need Infinix Hot 20i X665E Firmware?
The Infinix Hot 20i X665E uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:
- Recover your device when it only boots into recovery mode.
- Clear a forgotten screen lock, PIN, or pattern without needing the original credentials.
- Fix startup loops, lagging, and freezing on your device.
- Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
- Repair a phone that shuts down randomly or restarts in a loop.
- Resolve touchscreen responsiveness issues caused by a corrupted system build.
- Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Hot 20i X665E
Here is a quick overview of the official firmware specifications:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Hot 20i X665E |
| Firmware Version | V1346, V1362, V1349, V1271, V883, V739, V1711 |
| File Size | 3.04 GB to 3.84 GB |
| Android Version | Android 12, XOS 10.6 |
| Platform | MediaTek MT6765 Helio P35/G35 |
| Release Date | Released 2022, September 28 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V1711, download this one. It is the latest Infinix Hot 20i X665E firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V1362, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V1711 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V1711 failed with a flash error | Try V1362 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V1711, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.
Download Infinix Hot 20i X665E Firmware
Download the official stock firmware for your Infinix Hot 20i X665E below. The latest available version is V1711. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Hot_20i_X665E_MT6765_V1346_230215.zip Size: 3.8 GB | Download Link | Download Link2 |
| File Name: X665E-H6126YAb-S-RU-230223V1362.zip Size: 3.04 GB | Download Link | Download Link2 |
| File Name: X665E-H6126YAb-S-TR-230216V1349.zip Size: 3.33 GB | Download Link | Download Link2 |
| File Name: X665E-H6126YZAaAbAcAdAeAfAgAhAi-S-GL-230215V1346.zip Size: 3.84 GB | Download Link | Download Link2 |
| File Name: X665E-H6126YZAaAbAcAdAeAfAgAhAi-S-GL-221227V1271.zip Size: 3.73 GB | Download Link | Download Link2 |
| File Name: X665E-H6126YZA-S-GL-221019V883.zip Size: 3.7 GB | Download Link | Download Link2 |
| File Name: X665E-H6126YZAaAbAcAdAeAfAgAhAi-S-GL-220921V739.zip Size: 3.7 GB | Download Link | Download Link2 |
| File Name: Infinix-Hot-12i-X665E-H6126YZAaAbAcAdAeAfAg-S-GL-240313V1711-Flash-File.zip Size: 3.83 GB | Download Link | Download Link2 |
Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Hot 20i X665E (X665E) should not be confused with other Hot 20i variants that may have different chipsets or regional firmware. Even devices in the same Hot 20i line can use completely different processors. Always verify your exact model code “X665E” in Settings > About Phone before downloading any firmware from this page.
- Open About Phone and make sure the model code reads X665E. Do not rely on the name printed on the phone case.
- Verify the chipset is MediaTek MT6765 Helio P35/G35. You can see this in recovery mode or by checking the device specifications online.
- Use only the download links provided on this page.
- After downloading, right-click the file and check Properties to confirm the size matches the table above. If it does not, download it again.
Prepare Your Infinix Hot 20i X665E for Flashing
Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Hot 20i X665E and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
- Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
- Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
- Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
- USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
- Install Required Drivers:
Install Stock Firmware on Infinix Hot 20i X665E
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Get the Firmware Ready:
- Download the firmware file from the download section above.
- Right-click the ZIP and select “Extract Here” or use 7-Zip. Put the extracted files in a folder without spaces in the name, like
C:firmware.
- Verify Your Drivers:
- Make sure the required drivers are installed. After installing, restart your PC, drivers often do not activate until after a reboot.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Hit the “Download” button in the flash tool to start the process.
- Leave the phone and cable completely alone until it finishes. Any interruption during this stage risks corrupting the flash.
- Wait and Reboot:
- When the flash completes, unplug the USB cable from your phone.
- Turn on the device. First boot takes 3 to 8 minutes, do not force restart it during this time.
What to Do if Infinix Hot 20i X665E Flash Fails
- Infinix Hot 20i X665E Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X665E, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
After Flashing: What Happens Next on Infinix Hot 20i X665E
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
- Stuck in a bootloop after first boot? Enter recovery mode and do a factory reset from there, see the hard reset guide above. This can happen occasionally and does not mean the firmware is wrong.
- First boot takes 3 to 8 minutes, do not force-reboot the device. The operating system is setting itself up from scratch. Interrupting this is how devices end up in bootloops.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.
Missing IMEI or Corrupt Baseband on Infinix Hot 20i X665E After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Questions About Infinix Hot 20i X665E Firmware
Q1: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.
Q2: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.
Q3: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.
Q4: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.
Q5: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to a USB connection (even with a black screen), the flash tool can detect it. If the battery is completely drained, charge it for at least 15 minutes first.
Q6: Will flashing void my warranty?
A: Flashing official stock firmware generally does not void your warranty since you are restoring the device to its factory-intended state. However, some manufacturers may flag that the bootloader was unlocked or that the flash counter increased. Check your specific warranty terms with Infinix support if you are concerned.
Q7: My device is not detected by SP Flash Tool. What should I do?
A: Start with the drivers, reinstall the VCOM drivers, restart your PC, then try again. Switch to a USB 2.0 port if you are on USB 3.0. Disable your antivirus temporarily. If none of that works, leave a comment with the exact error message.
Q8: Can I go back to an older firmware version?
A: It is technically possible on some MediaTek builds, but downgrading can cause security issues and app compatibility problems. If the latest version is causing trouble, leave a comment below, there is usually a better fix than rolling back.
People Also Ask About Infinix Hot 20i X665E
What chipset does the Infinix Hot 20i X665E use?
The Infinix Hot 20i X665E uses the MediaTek MT6765 Helio P35/G35 chipset, a MediaTek processor. This means you need SP Flash Tool and VCOM/MTK USB drivers to flash firmware. MediaTek devices use scatter-file-based flashing, which is different from Qualcomm (QFIL) or Samsung (Odin) methods.
How do I check my Infinix Hot 20i X665E model number before flashing?
Go to Settings > About Phone on your Infinix Hot 20i X665E and look for the model number “X665E”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.
Can flashing firmware fix a bricked Infinix Hot 20i X665E?
Yes. If your Infinix Hot 20i X665E is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.
What is the latest firmware version for Infinix Hot 20i X665E?
The latest available Infinix Hot 20i X665E firmware on this page is version V1711. This page has 8 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.
Wrapping Up: Infinix Hot 20i X665E Firmware
You now have everything needed to flash your Infinix Hot 20i X665E back to stock using SP Flash Tool. The process is straightforward as long as you follow the steps in order and do not skip the driver installation.
Got stuck somewhere? Drop a comment with the error message and the step number. I check comments regularly and will point you in the right direction.
If this worked for you, share the page so others with the same device can find it too.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.
