Infinix Hot 11 X662B Firmware

Last Updated: August 11, 2026

This guide provides the official stock ROM, the necessary drivers, and a step-by-step process to restore your Infinix Hot 11 X662B to working condition.

---

Infinix Hot 11 X662B Firmware (Flash File) Drivers, Tools & Guide

I see the Infinix Hot 11 X662B come in often with software issues like FRP locks, bootloops, or a stuck logo. This guide puts all the necessary files in one place so you can fix the problem yourself. I have included the exact tools and instructions I use to get these phones working again.

One small tip: extract the firmware to a simple folder, like C:FirmwareX662B. SP Flash Tool can have trouble finding the scatter file if the folder path has spaces or special characters. It is a simple step, but it saves a lot of frustration.

There are two firmware files available for the Infinix Hot 11 X662B on this page. Choose the one that matches your current Android version for the best results. The stock firmware runs on Android 11 and XOS 7.6, which sets the default apps and interface you will see after the flash. The Infinix Hot 11 X662B firmware uses a MediaTek MT6768 Helio G80 chipset, so you will need SP Flash Tool and VCOM drivers to perform the flash. These are listed in the prerequisites below.

As a Transsion Holdings brand, Infinix devices share similar architectures and flashing procedures across the Hot 11 lineup. The firmware listed here was sourced from verified repositories and checked for integrity before being published.

Your Infinix Hot 11 X662B firmware is a compressed ZIP file. Download and extract it using WinRAR or 7-Zip. Once extracted, open the folder and check that the scatter file is present before you proceed.

This process restores the phone to its original factory state, which means all your personal data will be erased. That clean wipe fixes persistent problems like bootloops, forgotten locks, Google account verification, battery drain, and system errors.

---

How to Wipe Infinix Hot 11 X662B to Factory Settings

To factory reset Infinix Hot 11 X662B without a computer, power off the device completely, then hold Volume Up and Power at the same time until the recovery menu appears. Use the volume keys to navigate to “Wipe Data/Factory Reset” and confirm with the Power button.

A hard reset erases all data and restores Infinix Hot 11 X662B to its original factory state. This fixes most software problems, slow performance, app crashes, forgotten screen locks, and bootloops. If the issue persists after a factory reset, a full firmware flash using SP Flash Tool is covered in the following sections.

---

Infinix Hot 11 X662B Google Account Bypass After Reset

The fastest way to bypass FRP on Infinix Hot 11 X662B is to use a free Android apps launcher that lets you access settings during the setup wizard. After flashing or performing a factory reset you may see a Google account lock (FRP). Our free Android apps launcher is the fastest way to get past it. This is also why I always recommend removing your Google account before flashing, it avoids this problem entirely.

---

Why Flash Stock ROM on Infinix Hot 11 X662B?

The Infinix Hot 11 X662B uses a MediaTek chipset, and SP Flash Tool is the standard method for firmware recovery on MTK devices. Here is what flashing the stock firmware can help with:

• Recover your device when it only boots into recovery mode.
• Unlock your device if it has been locked or disabled.
• Fix Wi-Fi, Bluetooth, or mobile data connectivity that stopped working after an update.
• Repair a phone that shuts down randomly or restarts in a loop.
• Resolve touchscreen responsiveness issues caused by a corrupted system build.
• Update to the latest Android version supported by your phone.
• Recover from “Download DA FAIL” errors and Secure Boot authentication issues specific to the MediaTek chipset in your device.

Learn more about stock ROMs and why flashing works.

---

Which Firmware Version Does Your Infinix Hot 11 X662B Need?

The single biggest mistake I see people make is flashing firmware meant for a different variant. Before downloading anything, verify your exact device identity:

1. Open About Phone: Your device model must read “X662B” exactly. Even small differences in the code can mean a completely different chipset and partition layout.
2. Verify the Chipset Type: This firmware targets MediaTek MT6768 Helio G80 specifically. Flashing it on a different chipset will fail or could brick the device.
3. Check Your Current Firmware Version: Compare your build number with the versions listed in the download section to decide which file to use.
4. Use Recovery Mode: If you cannot access Settings (phone is stuck or locked), boot into recovery mode to read the build and chipset details from the screen.
5. Regional Compatibility: Some Infinix firmware packages target specific regions. Confirm the download matches your device origin.

---

Firmware Details for Infinix Hot 11 X662B

Here is a quick overview of the official firmware specifications:

Firmware Information	Details
Device Model	Infinix Hot 11 X662B
Firmware Version	V302, V392
File Size	2.91 GB to 3.28 GB
Android Version	Android 11, XOS 7.6
Platform	MediaTek MT6768 Helio G80
Release Date	Released 2021, September 21
Region	Global, Africa and Asia
File Type	ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)

---

Which Firmware Version Should I Download?

This is the question I get asked most often in the comments, so I put together a simple guide. Find your situation in the table and go straight to the right file:

Your Situation	What I Recommend
Phone is completely dead or stuck on logo	V392, download this one. It is the latest Infinix Hot 11 X662B firmware available.
FRP / Google account lock only	See the FRP bypass guide above, you likely do not need the full firmware for this.
Phone slow after a recent OTA update	Try V302, sometimes the latest OTA introduces new bugs and an older build runs better.
IMEI missing after a previous flash	Re-flash V392 first, then follow the IMEI repair guide. Do not skip the reflash.
V392 failed with a flash error	Try V302 instead and double-check your scatter file selection before assuming the firmware is the problem.
Restoring to factory / warranty repair	V392, clean state, fresh start.

My general approach with MTK devices: always try the latest version first. I have seen people spend a lot of time trying older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and make sure it is a driver issue you are solving, not a firmware issue.

---

Download Infinix Hot 11 X662B Firmware

Download the official stock firmware for your Infinix Hot 11 X662B below. The latest available version is V392. After downloading, verify the file size matches the table above, a size mismatch usually means a partial or corrupt download, and flashing a corrupt file can cause more problems than it solves.

Software Details	Download Link	Members Link
File Name: Infinix_Hot_11_X662B_MT6768_V302_210917.zip Size: 3.28 GB	Download Link	Download Link2

File Name: Infinix_X662B_MT6768_V392.zip Size: 2.91 GB

Download Link

Download Link2

Only download firmware that is fully compatible with your exact device model. See the firmware selection guide above if you are not sure.

Important: The Infinix Hot 11 X662B (X662B) should not be confused with other Hot 11 variants that may have different chipsets or regional firmware. Even devices in the same Hot 11 line can use completely different processors. Always verify your exact model code “X662B” in Settings > About Phone before downloading any firmware from this page.

---

Prerequisites for Infinix Hot 11 X662B Firmware

Do not skip this section. Most failed Infinix flashes come from rushing through the preparation steps. The VCOM driver installation is essential for the Infinix Hot 11 X662B and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.

1. Back Up IMEI Numbers: Dial *#06# and write down both IMEI numbers now. You will need these if you need to restore your IMEI after flashing.
2. Remove Google Accounts: Sign out of all Google accounts to prevent FRP lock after flashing.
3. Back Up Your Data: Back up everything, photos, contacts, WhatsApp chats, important files. Flashing wipes the device completely.
4. Charge Your Device: At least 50% battery. A device that powers off during a flash is very difficult to recover.
5. USB Cable & PC: Use a proper data USB cable, not a charge-only cable, and a Windows computer with available USB ports.
6. Install Required Drivers:
   • VCOM Drivers
   • Infinix USB Drivers

---

Step-by-Step: Flash Infinix Hot 11 X662B Stock ROM

We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.

1. Download and Unpack:
   • Pick the correct firmware version from the downloads above and save it to your PC.
   • Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
2. Driver Check:
   • Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
3. Load the Firmware File:
   • Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
4. Connect Your Device:
   • Power off your phone completely, not sleep mode, fully off.
   • Connect to your PC via USB cable. The flash tool will detect it automatically.
5. Start Flashing:
   • Start the flash by clicking “Download”.
   • Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
6. Wait and Reboot:
   • The flash is complete when the tool shows a success indicator. Disconnect your phone.
   • Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.

---

What to Expect After Flashing

Here is what is completely normal after a successful flash:

• How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
• Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
• Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
• Battery percentage may seem inaccurate for the first day. The battery statistics are calibrated during normal use. Charge the phone fully once without interruption and the readings will stabilize.
• The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
• Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
• The phone may ask for language and region again, this is normal after a flash. You are starting from a clean state, so the setup wizard runs just like when the phone was brand new.

---

Troubleshooting Infinix Hot 11 X662B Flash Errors

1. Infinix Hot 11 X662B Not Recognized by SP Flash Tool:
   • In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X662B, restart your PC, and try again before changing anything else.
   • If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
   • Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
2. Boot Loop After Flashing:
   • Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
3. Wrong Scatter File / Firmware Mismatch:
   • If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
4. “Download DA FAIL” Error:
   • This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
5. Error 8038 (BROM Error):
   • The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
6. Auth File / Secure Boot Error in Newer SP Flash Tool:
   • Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.

---

Missing IMEI or Corrupt Baseband on Infinix Hot 11 X662B After Flashing?

A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:

1. Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
2. Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
3. Run the repair:
   • Connect your device to the computer.
   • Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
   • Click “Start” and let it complete without interrupting the connection.
4. Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.

Video Guide: How to repair IMEI

Credits: https://www.youtube.com/@mhgsmclinic

---

Common Questions About Flashing Infinix Hot 11 X662B

Q1: How long does the flashing process take?
A: The actual flash usually takes between 3 and 10 minutes depending on the firmware size and USB connection speed. The first boot after flashing takes another 3 to 8 minutes. Do not interrupt the device during either stage. If the progress bar in SP Flash Tool appears stuck, give it a few more minutes before assuming something went wrong.

Q2: Do I need an internet connection during flashing?
A: No. The flashing process is entirely offline, it happens between your PC and the phone via the USB cable. You do not need internet at any point during the flash itself. You will need internet later to set up the phone and download your apps.

Q3: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it looks alarming, but it is fixable. Follow the IMEI repair guide in the troubleshooting section above. For MediaTek devices, SN Write Tool or Maui Meta will handle the repair. Do not insert a SIM card until the IMEI is restored.

Q4: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced on this page are Windows-only. If you are on Mac or Linux, your best option is to use a Windows virtual machine, or borrow a Windows PC for the 10 minutes it takes to complete the flash.

Q5: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power at the same time until the recovery menu appears. The recovery menu displays the build number which you can use to verify your firmware version before flashing.

Q6: Is this firmware compatible with other Infinix models?
A: No. This firmware is built specifically for the Infinix Hot 11 X662B running on the MediaTek MT6768 Helio G80 chipset. Even variants of the Hot 11 with a different letter suffix can have a completely different chipset inside. Flashing the wrong firmware can leave your phone in a state that is very difficult to recover from. Always check your exact model number in Settings.

Q7: What if the flash fails halfway through?
A: Do not panic and do not disconnect the phone. Close SP Flash Tool, restart it, and try the flash again from the beginning. In most cases, a failed flash just means the process needs to be repeated. The device is usually still detectable by the flash tool even after a failed attempt.

Q8: What should I do if I encounter an FRP lock after flashing?
A: Use our free Android apps launcher. FRP lock activates when a Google account was still signed in before flashing. This is why signing out of your Google account before flashing avoids this issue entirely.

People Also Ask About Infinix Hot 11 X662B

What is the latest firmware version for Infinix Hot 11 X662B?
The latest available Infinix Hot 11 X662B firmware on this page is version V392. This page has 2 firmware builds available for download. Check the firmware details table above for file sizes and Android versions.

Will flashing firmware on Infinix Hot 11 X662B erase my data?
Yes. Flashing stock firmware on the Infinix Hot 11 X662B with SP Flash Tool performs a full factory reset. All apps, photos, contacts, and accounts will be removed. Back up everything important before you start. There is no way to recover data after flashing.

How do I check my Infinix Hot 11 X662B model number before flashing?
Go to Settings > About Phone on your Infinix Hot 11 X662B and look for the model number “X662B”. You can also confirm by entering recovery mode (Volume Up + Power while powered off) which displays the build number and model code. Always match this exactly with the firmware filename before flashing.

Can flashing firmware fix a bricked Infinix Hot 11 X662B?
Yes. If your Infinix Hot 11 X662B is stuck on the logo, in a bootloop, or will not turn on, flashing the stock firmware with SP Flash Tool can restore it to working condition. This is the standard repair method used by service centers for Infinix devices.

---

Summary

That is everything you need to safely flash the official Infinix Hot 11 X662B firmware (V392) using SP Flash Tool and get your device working again. If you followed each step, your phone should now be running on a clean build.

If something did not go as expected, a specific error, a step that is not working for your setup, leave a comment below with as much detail as you can: the exact error message, which step you are on, and what you have already tried. I read every comment and will help you work through it.

If this guide helped you, consider sharing it, it is the best way to help someone else who is dealing with the same problem.

Browse all Infinix firmware downloads for more devices.

---

Disclaimer: Flashing stock firmware is performed at your own risk. Follow the instructions on this page carefully. I cannot be held responsible for any damage to your device, but I will always try to help if something goes wrong.