Last Updated: August 20, 2026
Find everything you need to flash your Infinix Hot 9 Pro X655F here: stock ROM files, required tools and drivers, step-by-step instructions, plus FRP bypass and troubleshooting solutions all in one place.
Device: Infinix Hot 9 Pro X655F | Chipset: MediaTek MT6765 (Helio P35/G35) | Flash Tool: SP Flash Tool
Android: Android 10, XOS 6.0 | File Type: ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more)
⚠ Warning: Flashing erases all data. Back up first.
Device: Infinix Hot 9 Pro X655F (MediaTek MT6765 (Helio P35/G35))
Flash Tool: SP Flash Tool
Latest Build: V296
Firmware Files: 17 available
What You Need: Windows PC, USB data cable, SP Flash Tool, USB drivers
Time Required: 10-20 minutes (plus 3-8 min first boot)
Infinix Hot 9 Pro X655F Firmware (Flash File) Drivers, Tools & Guide
The Infinix Hot 9 Pro X655F firmware guide provides all necessary files and instructions to restore your device. This device commonly arrives with FRP locks, bootloop issues, or stuck on the Infinix logo. This guide consolidates firmware downloads, tools, and precise procedures used in professional repairs.
Before beginning, extract firmware to a simple folder path such as C:FirmwareX655F. SP Flash Tool may fail to locate the scatter file if the folder contains spaces or special characters. This small step prevents frustrating delays when the tool cannot load the file.
The Infinix Hot 9 Pro X655F launched in 2020 with MediaTek MT6765 (Helio P35/G35) chipset. Windows driver compatibility on newer systems (10/11) often requires manual installation. This page offers 17 firmware builds covering multiple Android versions. If one build fails, try another variant. The MediaTek architecture requires SP Flash Tool with VCOM/MTK drivers for flashing, detailed in the prerequisites section.
The Infinix Hot 9 Pro X655F firmware is distributed as a compressed ZIP. Use WinRAR or 7-Zip for extraction. After unpacking, verify the scatter file exists in the folder before proceeding.
Flashing returns the device to factory condition. All user data—photos, messages, applications—will be removed. This clean state resolves stuck logos, FRP locks, software corruption, and performance problems.
Infinix Hot 9 Pro X655F Google Account Bypass After Reset
The fastest method to bypass FRP on Infinix Hot 9 Pro X655F uses a free Android apps launcher to access settings during setup. After flashing or factory reset, you may encounter Google account lock (FRP). Our free Android apps launcher provides the quickest solution. Removing your Google account before flashing prevents this issue entirely.
Infinix Hot 9 Pro X655F Hard Reset Guide
To factory reset Infinix Hot 9 Pro X655F without a computer, power off the device completely, then hold Volume Up and Power simultaneously until the recovery menu appears. Navigate to “Wipe Data/Factory Reset” using volume keys and confirm with Power.
A hard reset erases all data and restores Infinix Hot 9 Pro X655F to original factory state. This resolves most software issues including slow performance, app crashes, forgotten screen locks, and bootloops. Persistent problems after factory reset require full firmware flashing with SP Flash Tool as detailed below.
How to Pick the Correct Infinix Hot 9 Pro X655F Firmware
The most frequent error involves flashing firmware for a different variant. Before downloading, confirm your exact device identity:
- Check About Phone: Open Settings and locate your exact model number. It must read “X655F”, not a similar name, the precise code.
- Match the Chipset: This firmware supports MediaTek MT6765 (Helio P35/G35). A different processor will prevent successful flashing.
- Review Build Number: Compare your current software build string with the firmware table below.
- Check Recovery Mode: Power off, hold Volume Up + Power until recovery appears. The screen displays chipset and current build, use this for confirmation.
- Compare File Details: Ensure the version in the download table matches your device and region expectations.
When Should You Flash Infinix Hot 9 Pro X655F?
The Infinix Hot 9 Pro X655F uses MediaTek architecture, making SP Flash Tool standard for firmware recovery. Stock firmware flashing resolves the following issues:
- Remove persistent malware or adware surviving factory reset.
- Update to the latest supported Android version.
- Recover devices booting only into recovery mode.
- Fix phones with random shutdowns or restart loops.
- Unlock disabled or locked devices.
- Restore Wi-Fi, Bluetooth, or mobile data connectivity after updates.
- Resolve “Download DA FAIL” errors and Secure Boot authentication issues specific to MediaTek MT6765.
Learn more about stock ROMs and why flashing works.
Firmware Details for Infinix Hot 9 Pro X655F
Official firmware specifications overview:
| Firmware Information | Details |
|---|---|
| Device Model | Infinix Hot 9 Pro X655F |
| Firmware Version | V108, V296, V288, V282, V280, V268, V262, V251, V243, V238, V229, V149 |
| File Size | 2.05 GB to 2.22 GB |
| Android Version | Android 10, XOS 6.0 |
| Platform | MediaTek MT6765 (Helio P35/G35) |
| Release Date | Released 2020, June 05 |
| Region | Global, Africa and Asia |
| File Type | ZIP (Includes Scatter File [MT6xxx_Android_scatter.txt], preloader.bin, boot.img, system.img, recovery.img, lk.bin, logo.bin, nvram.img, and more) |
Which Firmware Version Should I Download?
This common question requires a simple guide. Match your situation to the table and proceed directly:
| Your Situation | What I Recommend |
|---|---|
| Phone is completely dead or stuck on logo | V296, download this one. It is the latest Infinix Hot 9 Pro X655F firmware available. |
| FRP / Google account lock only | See the FRP bypass guide above, you likely do not need the full firmware for this. |
| Phone slow after a recent OTA update | Try V288, sometimes the latest OTA introduces new bugs and an older build runs better. |
| IMEI missing after a previous flash | Re-flash V296 first, then follow the IMEI repair guide. Do not skip the reflash. |
| V296 failed with a flash error | Try V288 instead and double-check your scatter file selection before assuming the firmware is the problem. |
| Restoring to factory / warranty repair | V296, clean state, fresh start. |
My general approach with MTK devices: always try the latest version first. I have seen people spend excessive time with older builds when the newest one would have worked fine. Only move to an older version if the latest fails more than once, and confirm you are solving a driver issue, not a firmware problem.
Download Infinix Hot 9 Pro X655F Firmware
Download the official stock firmware for your Infinix Hot 9 Pro X655F below. The latest available version is V296. After downloading, verify the file size matches the table above, a size mismatch usually indicates a partial or corrupt download, and flashing corrupt files causes more problems than solutions.
| Software Details | Download Link | Members Link |
|---|---|---|
|
File Name: Infinix_Hot_9_Pro_X655F_MT6765_V108_200102.zip Size: 2.1 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-220411V296.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-9-PRO-X655F-H6211E-Q-AS-220215V288.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-211201V282.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-211022V280.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-210726V268.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-210604V262.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-210219V251.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-201210V243.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-201026V238.zip Size: 2.18 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-200628V229.zip Size: 2.14 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-200307V149.zip Size: 2.05 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-200102V108.zip Size: 2.08 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-AS-220411V296.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-9-PRO-X655F-H6211E-Q-AS-220215V288-FLASH-FILE.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: INFINIX-HOT-9-PRO-X655F-H6211E-Q-AS-211022V280.zip Size: 2.22 GB | Download Link | Download Link2 |
| File Name: X655F-H6211E-Q-200102V108.zip Size: 2.06 GB | Download Link | Download Link2 |
Only download firmware fully compatible with your exact device model. See the firmware selection guide above if you are not sure.
Important: The Infinix Hot 9 Pro X655F (X655F) should not be confused with other Hot 9 Pro variants that may have different chipsets or regional firmware. Even devices in the same Hot 9 Pro line can use completely different processors. Always verify your exact model code “X655F” in Settings > About Phone before downloading any firmware from this page.
- Open About Phone and make sure the model code reads X655F. Do not rely on the name printed on the phone case.
- Verify the chipset is MediaTek MT6765 (Helio P35/G35). You can see this in recovery mode or by checking the device specifications online.
- Use only the download links provided on this page.
- After downloading, right-click the file and check Properties to confirm the size matches the table above. If it does not, download it again.
Prepare Your Infinix Hot 9 Pro X655F for Flashing
Do not skip this section. Most failed Infinix flashes result from rushing preparation steps. The VCOM driver installation is essential for the Infinix Hot 9 Pro X655F and other MediaTek devices. Windows may show the device in Device Manager and SP Flash Tool will still not detect it if the correct VCOM driver is not installed.
- Record IMEI Before Flashing: Dial *#06# and save both IMEI numbers somewhere safe, a screenshot works. If flashing corrupts the baseband, these numbers are what you will need to restore cellular connectivity.
- Unlink Google Accounts: Go to Settings, then Accounts, and remove all Google accounts. This prevents Factory Reset Protection from activating after the flash. It is the single most skipped step and causes the most post-flash headaches.
- Full Data Backup: Flashing erases everything. Transfer your photos, contacts, app data, and any important files to your computer or cloud backup before starting.
- Charge the Battery: Make sure you have at least 50% charge. A dead battery during a flash can corrupt the system partition and turn a fixable problem into a much bigger one.
- Windows PC and USB Cable: You will need a Windows computer and a data-capable USB cable. Cheap charge-only cables are the number one reason flash tools fail to detect devices.
- Driver Installation:
Flashing Infinix Hot 9 Pro X655F Firmware With SP Flash Tool
We are using SP Flash Tool for this. For older devices, I recommend trying SP Flash Tool v5.1924 first. The newer versions of SP Flash Tool require a DA (Download Agent) file that older firmware packages do not include, and that is what causes the “Auth” errors you may have seen. If SP Flash Tool keeps asking for an auth file and you do not have one, switch to MTK Client, it handles Secure Boot automatically. Download SP Flash Tool for Windows or SP Flash Tool for Linux and follow the steps below. The complete SP Flash Tool guide is also available if you need more detail.
- Download and Unpack:
- Pick the correct firmware version from the downloads above and save it to your PC.
- Extract the ZIP file. If the extracted folder contains another ZIP inside, extract that one too. You should end up with the actual firmware files, not another archive.
- Driver Check:
- Double-check that you have installed the required drivers. A missing driver is the most common reason the flash tool cannot detect your phone. Reboot your PC after installing.
- Load the Firmware File:
- Click on the “Scatter-loading” button. Navigate to the folder where you extracted the firmware and select the “scatter.txt” file.
- Connect Your Device:
- Power off your phone completely, not sleep mode, fully off.
- Connect to your PC via USB cable. The flash tool will detect it automatically.
- Start Flashing:
- Start the flash by clicking “Download”.
- Leave everything untouched until completion. Even bumping the USB cable can interrupt the write and cause a failed flash.
- Wait and Reboot:
- The flash is complete when the tool shows a success indicator. Disconnect your phone.
- Turn the phone on. Do not worry if it sits on the boot logo for several minutes, the system is rebuilding itself from scratch.
Common Issues When Flashing Infinix Hot 9 Pro X655F
- Infinix Hot 9 Pro X655F Not Recognized by SP Flash Tool:
- In most cases this is a driver issue, not a cable issue. Reinstall the VCOM drivers for the X655F, restart your PC, and try again before changing anything else.
- If that does not work, switch to a USB 2.0 port, USB 3.0 ports can cause detection issues with MediaTek devices more often than people expect.
- Still not working? Temporarily disable your antivirus. It can block the VCOM driver from loading without giving you any error message.
- Boot Loop After Flashing:
- Enter recovery mode and perform a factory reset from there. Most post-flash bootloops on MediaTek are caused by conflicts with old cached data, a wipe from recovery usually fixes this without needing to reflash.
- Wrong Scatter File / Firmware Mismatch:
- If SP Flash Tool throws an error as soon as you try to start the download, check your scatter file first. A mismatch between the scatter file and your device build is one of the most common causes of flash errors.
- “Download DA FAIL” Error:
- This error comes up regularly. It almost always means the VCOM driver is not properly installed. Reinstall it, restart your PC, and try again. If that still does not work, try switching to SP Flash Tool v5.1924, older devices sometimes respond better to the older version.
- Error 8038 (BROM Error):
- The device is not entering BROM mode correctly. Power it off completely and, if possible, remove the battery for 30 seconds. Reconnect and try again. Some MediaTek devices require you to hold Volume Down while plugging in the USB cable to enter BROM mode.
- Auth File / Secure Boot Error in Newer SP Flash Tool:
- Newer versions of SP Flash Tool require a DA (Download Agent) authentication file for devices with Secure Boot enabled. If you do not have that file, switch to MTK Client instead, it handles Secure Boot automatically and is the simpler solution.
What to Expect After Flashing
Here is what is completely normal after a successful flash:
- How to know the flash was successful: SP Flash Tool will show a green circle or checkmark when done. If you see that, the flash completed successfully.
- Be careful when re-adding your Google account, if you did not remove it before flashing, you may see an FRP prompt. Add it fresh during the setup wizard, not afterwards through Settings.
- The phone will feel warm during first boot, this is normal. It settles after a few minutes once the initial app setup is complete.
- Notification sounds and ringtones will be back to factory defaults. Any custom tones you had set before will need to be re-downloaded and re-assigned in Settings.
- Fingerprint and face unlock data are erased during the flash. You will need to re-register your fingerprints and face data from scratch in the security settings.
- Wi-Fi, Bluetooth, and mobile data should all work right after setup. If mobile data is not connecting, go to Settings, SIM and Network, and re-enter your APN manually, the flash sometimes clears carrier APN settings.
- Storage will show almost full capacity available since all your apps and files are gone. The system partition size varies by firmware version but is typically 4 to 8 GB on most devices.
Missing IMEI or Corrupt Baseband on Infinix Hot 9 Pro X655F After Flashing?
A missing or unknown IMEI is one of the most common things I see after a MediaTek flash. It happens because the NVRAM partition, which stores your IMEI and calibration data, sometimes does not survive the flash intact. It looks alarming, but it is fixable. Here is what to do:
- Check your drivers first: Install the Mediatek CDC Driver if you have not already, without it, the IMEI repair tools will not detect your device. This is the step most people miss.
- Use SN Write Tool or Maui Meta: SN Write Tool is the first option I try, it is straightforward and works on most MTK devices. Maui Meta is the alternative if SN Write does not connect. You can learn more about using SN Write Tool here.
- Run the repair:
- Connect your device to the computer.
- Enter the original IMEI numbers for both SIM slots, these are the numbers you wrote down before flashing.
- Click “Start” and let it complete without interrupting the connection.
- Verify after reboot: Once done, reboot your phone and dial *#06#. Your IMEI numbers should be back. If they are still showing null, run the process again, sometimes the first attempt does not complete correctly.
Video Guide: How to repair IMEI
Credits: https://www.youtube.com/@mhgsmclinic
Infinix Hot 9 Pro X655F Firmware FAQ
Q1: My device is not detected by SP Flash Tool. What should I do?
A: Begin with driver troubleshooting, reinstall the VCOM drivers, restart your PC, then retry. Switch to a USB 2.0 port if using USB 3.0. Temporarily disable your antivirus. If these steps fail, provide the exact error message in a comment.
Q2: Can I use a Mac or Linux computer for this?
A: The tools and drivers referenced here are Windows-only. Mac or Linux users should use a Windows virtual machine or borrow a Windows PC for the 10-minute flash process.
Q3: Can I go back to an older firmware version?
A: Technically possible on some MediaTek builds, but downgrading risks security issues and app compatibility problems. If the latest version causes trouble, leave a comment below, better solutions usually exist instead of rolling back.
Q4: Is it safe to flash during a power outage risk?
A: Avoid flashing during unstable power conditions. If your PC shuts down during the flash, it can corrupt the write and leave the phone unbootable. Use a laptop with a fully charged battery in areas with unreliable power.
Q5: Can I flash this firmware if my phone does not turn on at all?
A: Yes, in most cases. As long as the phone responds to USB connection (even with a black screen), the flash tool can detect it. Charge a completely drained battery for at least 15 minutes first.
Q6: My IMEI shows “unknown” after flashing. Is my phone permanently damaged?
A: No, it appears concerning but is repairable. Follow the IMEI repair guide above. Use SN Write Tool or Maui Meta for MediaTek devices. Do not insert a SIM card until IMEI restoration is complete.
Q7: How do I enter recovery mode?
A: Power the device off completely, then hold Volume Up + Power simultaneously until the recovery menu appears. The recovery screen displays the build number for firmware verification before flashing.
Q8: Is this firmware compatible with other Infinix models?
A: No. This firmware is exclusively for Infinix Hot 9 Pro X655F with MediaTek MT6765 (Helio P35/G35) chipset. Even similar Hot 9 Pro variants with different letter suffixes may use different processors. Flashing incorrect firmware can cause irrecoverable damage. Always verify your exact model number in Settings.
People Also Ask About Infinix Hot 9 Pro X655F
What is the latest firmware version for Infinix Hot 9 Pro X655F?
The latest available Infinix Hot 9 Pro X655F firmware on this page is version V296. This page offers 17 firmware builds for download. Refer to the firmware details table above for file sizes and Android versions.
What chipset does the Infinix Hot 9 Pro X655F use?
The Infinix Hot 9 Pro X655F employs the MediaTek MT6765 (Helio P35/G35) chipset. This requires SP Flash Tool with VCOM/MTK USB drivers for flashing. MediaTek devices use scatter-file-based flashing methods distinct from Qualcomm (QFIL) or Samsung (Odin) approaches.
Can flashing firmware fix a bricked Infinix Hot 9 Pro X655F?
Yes. If your Infinix Hot 9 Pro X655F is stuck on the logo, in a bootloop, or unresponsive, flashing stock firmware with SP Flash Tool can restore functionality. This is the standard repair method used by service centers for Infinix devices.
Will flashing firmware on Infinix Hot 9 Pro X655F erase my data?
Yes. Flashing stock firmware on the Infinix Hot 9 Pro X655F with SP Flash Tool performs a complete factory reset. All apps, photos, contacts, and accounts will be removed. Back up all important data before proceeding. Data recovery is impossible after flashing.
Summary
The flashing process is complete. Your Infinix Hot 9 Pro X655F should now be running official stock firmware without the issues that brought you here.
If any step differs from instructions or errors occur, post details in the comments. Every question receives a response.
This guide updates with new firmware releases, so return anytime you need a newer version.
Browse all Infinix firmware downloads for more devices.
Disclaimer: Flashing stock firmware carries inherent risks. Follow instructions carefully. I cannot be held responsible for device damage, but will assist if issues arise.
